1658013-2 TE Connectivity, 1658013-2 Datasheet - Page 4

• Manufacturer Part Number: 1658013-2
• Description: High Speed / Modular Connectors MICTOR SB 80P PLUG 240
• Manufacturer: TE Connectivity
• Series: MICTOR SB Seriesr

Specifications of 1658013-2

• Product Type: Plugs
• Number Of Rows: 1
• Number Of Positions / Contacts: 14
• Mounting Angle: Vertical
• Pitch: 0.8 mm
• Mounting Style: Through Hole
• Termination Style: Solder
• Housing Material: Liquid Crystal Polymer
• Contact Material: Phosphor Bronze
• Contact Plating: Nickel
• Product Line: MICTOR SB
• Impedance (?): 50
• Solder Tail Contact Plating: Gold over Nickel
• Number Of Positions: 80
• Centerline (mm [in]): 0.80 [0.031]
• Polyamide Film Pad: Without
• Contact Loading Pattern: Fully Loaded
• Contact Plating, Mating Area, Material: Select Gold
• Contact Material (signal): Phosphor Bronze
• Contact Material (ground): Phosphor Bronze
• Connector Style: Plug
• Housing Color: Black
• Stack Height (mm [in]): 5.00 [0.197]
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Reflow solder capable to 245°C, Reflow solder capable to 260°C
• Rohs/elv Compliance History: Always was RoHS compliant
• Temperature Range (°c): -65 – +125
• Packaging Method: Tray
• Lead Free Status / Rohs Status: Details

3.6.
4.
4.1.
4.2.
Rev B
Product Qualification and Requalification Test Sequence
QUALITY ASSURANCE PROVISIONS
Qualification Testing
A.
B.
Requalification Testing
If changes significantly affecting form, fit or function are made to the product or manufacturing process,
product assurance shall coordinate requalification testing, consisting of all or part of the original testing
sequence as determined by development/product, quality and reliability engineering.
Initial examination of product
Low level contact resistance
Insulation resistance
Withstanding voltage
Solderability, dip test
Vibration, random
Mechanical shock
Durability
Mating force
Unmating force
Thermal shock
Humidity-temperature cycling
Temperature life
Final examination of product
Specimen Selection
Specimens shall be prepared in accordance with applicable Instruction Sheets and shall be
selected at random from current production. Test groups 1 and 2 each shall consist of 3 mated
pairs (plug and receptacle) of vertical assemblies. Test group 3 shall consist of 5 unmounted,
mated pairs (plug and receptacle) of vertical assemblies with housings fully populated with signal
contacts and bus bars. Test group 4 shall consist of 5 unmated and unmounted specimens.
Test Sequence
Qualification inspection shall be verified by testing specimens as specified in Figure 2.
NOTE
Test or Examination
(a)
(b)
(c)
See paragraph 4.1.A.
Numbers indicate sequence in which tests are performed.
Precondition specimens with 3 durability cycles.
3, 7
5
6
4
2
8
9
Figure 2
1
1
2, 4
3 (c)
5
Test Sequence (b)
2
1
Test Group (a)
2, 6
3, 7
4
5
8
3
1
2
3
4
1
108-2139
4 of 5