1-532448-1 TE Connectivity, 1-532448-1 Datasheet - Page 5

• Manufacturer Part Number: 1-532448-1
• Description: High Speed / Modular Connectors HDI PIN ASSY 4 ROW 280 POS
• Manufacturer: TE Connectivity
• Series: AMP-HDI Seriesr

Specifications of 1-532448-1

• Number Of Rows: 4
• Number Of Positions / Contacts: 26
• Mounting Angle: Vertical
• Termination Style: Solder
• Housing Material: Polyphenylene Sulfide, Glass Filled
• Contact Material: Copper Alloy
• Contact Plating: Gold (30)
• Product Type: Connector
• Gender: Plug
• Pcb Mount Style: Through Hole
• Pcb Mounting Orientation: Vertical
• Make First / Break Last: No
• Pcb Mount Retention: With
• Termination Post Length (mm [in]): 6.35 [0.250]
• Solder Tail Contact Plating: Tin
• Number Of Positions: 280
• Centerline (mm [in]): 2.54 [0.100]
• Pcb Mount Retention Type: Compliant Posts
• Contact Configuration: Four-Beam
• Contact Plating, Mating Area, Material: Gold (30)
• Contact Base Material: Phosphor Bronze
• Underplate Material: Nickel
• Mating Alignment: Without
• Housing Color: Brown
• Housing Material Temperature: High
• Center Guide: Without
• Government/industry Qualification: No
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Lead Free Status / Rohs Status: Details

4.
4.1.
4.2.
Rev C
QUALITY ASSURANCE PROVISIONS
Qualification Testing
A.
B.
C.
Quality Conform ance Inspection
The applicable inspection plan will specify sam pling acceptable quality level to be used. Dim ensional
and functional requirem ents shall be in accordance with applicable product drawing and this
specification.
Sam ple Selection
Connector housings and contacts shall be prepared in accordance with applicable Instruction
Sheets and shall be selected at random from current production. Test groups 1, 2 and 3 shall each
consist of 3 connectors of the greatest num ber of position of each type offered. Two additional
specim ens shall be selected from least num ber of positions offered and tested with group 2. Test
group 4 shall consist of 20 contacts.
Test Sequence
Qualification inspection shall be verified by testing sam ples as specified in Figure 1.
Acceptance
(1)
(2)
All sam ples tested in accordance with this specification shall m eet the stated tolerance lim it.
Failures attributed to equipm ent, test setup, or operator deficiencies shall not disqualify the
product. W hen product failure occurs, corrective action shall be taken and sam ples
resubm itted for qualification.
108-9063
5 of 6