BM10B(0.6)-40DP-0.4V(75) Hirose Electric Co Ltd, BM10B(0.6)-40DP-0.4V(75) Datasheet - Page 11

• Manufacturer Part Number: BM10B(0.6)-40DP-0.4V(75)
• Description: FFC / FPC Connectors 40P 2 ROW HEADER SMT VERT .6MM HGHT
• Manufacturer: Hirose Electric Co Ltd
• Series: BM10r

Specifications of BM10B(0.6)-40DP-0.4V(75)

• Connector Type: Header, Outer Shroud Contacts
• Number Of Positions: 40
• Pitch: 0.016" (0.40mm)
• Number Of Rows: 2
• Mounting Type: Surface Mount
• Features: Solder Retention
• Contact Finish: Gold
• Contact Finish Thickness: -
• Mated Stacking Heights: 0.6mm
• Height Above Board: 0.020" (0.50mm)
• Lead Free Status / Rohs Status: Details

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
BM10 Series●0.4 mm Contact Pitch,Stacking Height 0.6mm 0.8mm Board-to-Board /Board-to-FPC Connectors
■CHandling Precautions When Un-mating Connectors
BM10*(#)-*DP-0.4V
Fully mated
BM10*(#)-*DS-0.4V
Lift even, keeping both connectors parallel to
each other
When handling, circumstances may prevent
the connectors from being kept parallel when
un-mating. One end may be lifted as shown.
However, to use this procedure the connector
must be mounted on sufficiently rigid circuit
board.
Any deflection of the board during this
Pitch orientation
operation may result in damage to the
connector or solder joints.
Do not attempt to start the un-mating of the
connectors from one side or corner.
Failure to exercise caution when un-mating
the connectors mounted on the non-rigid FPC
may also result in connector breakage.
It is the responsibility of the user to perform
verification of the repeated mating / un-mating
Corner orientation
Width orientation
cycles with the connectors mounted on the
applicable FPC.
When the rigidity of the FPC is low, there is a
risk that the connector could break as
illustrated in the diagram at left.
Please use the connectors after performing a
check of repeated operation with the FPC that
the customer will be using.
Evaluative results of FPC rigidity and various
items are available. Please inquire.
11