R88M-W60010H-S2 Omron, R88M-W60010H-S2 Datasheet - Page 110
![no-image](/images/manufacturer_photos/0/4/494/omron_sml.jpg)
R88M-W60010H-S2
Manufacturer Part Number
R88M-W60010H-S2
Description
SERVO MOTOR 600W 200V
Manufacturer
Omron
Datasheet
1.R88A-PR02W.pdf
(458 pages)
Specifications of R88M-W60010H-S2
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Other names
R88MW60010HS2
- Current page: 110 of 458
- Download datasheet (5Mb)
Standard Models and Specifications
When another torque limit function besides Pn404/Pn405 is enabled, the output torque is limited to the
lower of the values.
Note 1. This is the default allocation. Input terminal allocations (CN1 pins 40 to 46) can be changed by
Note 2. With the default allocation, the functions for pins 45 and 46 can be changed to PCL/NCL or
D Rotation Direction Command Input (41: RDIR)
This signal specifies the direction of rotation when operation is carried out at the internally set speed
(numbers 1 to 3). When this signal is OFF, the direction is forward; when it is ON, the direction is reverse.
Note 1. This is the default allocation. Input terminal allocations (CN1 pins 40 to 46) can be changed by
Note 2. With the default allocation, the function for pin 41 is changed to MING, PLOCK, TVSEL, RDIR,
D Speed Selection Command 1 (45: SPD1)
Refer to the table under Control Mode Switch (41: TVSEL) .
Note 1. This is the default allocation. Input terminal allocations (CN1 pins 40 to 46) can be changed by
Note 2. The control mode will change according to the status of the TVSEL signal when Pn50A.0 is
Note 3. With the default allocation, the functions for pin 45 and 46 can be changed to PCL/NCL or
D Control Mode Switch (41: TVSEL)
The SPD1 and SPD2 signals are enabled when Pn000.1 (function selection basic switch: control mode
selection) is set to any of the settings between 3 and 6.
The TVSEL signal is enabled when Pn000.1 is set to any of the settings between 4 and 9.
The control mode and internal speed set in Pn301 to Pn303 are changed using signal combinations, as
shown in the following table.
2-82
Speed Selection Command 2 (46: SPD2)
setting Pn50A.0 (input signal selection mode) to 1. The PCL signal is allocated by Pn50b.2,
and the NCL signal is allocated by Pn50b.3.
SPD1/SPD2 by means of the Pn000.1 (control mode selection) setting and the control mode
in operation. For details, refer to 4-4-3 Important Parameters .
setting Pn50A.0 (input signal selection mode) to 1. The RDIR signal is allocated by Pn50C.0.
or IPG according to the Pn000.1 (control mode selection) setting and the control mode in op-
eration. For details, refer to 4-4-3 Important Parameters .
setting Pn50A.0 (input signal selection mode) to 1. The SPD1 signal is allocated by Pn50C.1,
and the SPD2 signal is allocated by Pn50C.2.
set to 1.
SPD1/SPD2 by means of the Pn000.1 (control mode selection) setting and the control mode
in operation. For details, refer to 4-4-3 Important Parameters .
Chapter 2
Related parts for R88M-W60010H-S2
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
![G6S-2G](/images/no-image3.png)
Part Number:
Description:
G6S-2GLow Signal Relay
Manufacturer:
Omron Corporation
Datasheet:
![G3NE-220T](/images/no-image3.png)
Part Number:
Description:
Compact, Low-cost, SSR Switching 5 to 20 A
Manufacturer:
Omron Corporation
Datasheet:
![G6K-2G-Y](/images/no-image3.png)
Part Number:
Description:
Manufacturer:
Omron Corporation
Datasheet:
![G4A-1A-E](/images/no-image3.png)
Part Number:
Description:
Manufacturer:
Omron Corporation
Datasheet:
![G5NB-1A-E](/images/no-image3.png)
Part Number:
Description:
Manufacturer:
Omron Corporation
Datasheet:
![G6B-2114P-US](/images/no-image3.png)
Part Number:
Description:
Manufacturer:
Omron Corporation
Datasheet: