R88M-WP20030T-BWS1 Omron, R88M-WP20030T-BWS1 Datasheet - Page 407
![no-image](/images/manufacturer_photos/0/4/494/omron_sml.jpg)
R88M-WP20030T-BWS1
Manufacturer Part Number
R88M-WP20030T-BWS1
Description
SERVO MOTOR 200W 200V W/BRAKE
Manufacturer
Omron
Datasheet
1.R88A-PR02W.pdf
(458 pages)
Specifications of R88M-WP20030T-BWS1
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Other names
R88MWP20030TBWS1
- Current page: 407 of 458
- Download datasheet (5Mb)
Troubleshooting
Display
Multi-turn limit mis-
match (ABS)
Deviation counter
overflow
Motor-load deviation
over*
Error
Occurs when the
control circuit power
supply is turned ON.
Servomotor will not
rotate even when
command pulses
are input.
Occurs when rotat-
ing at high speed.
Occurs when long
command pulses
are sent.
Occurs when the
motor or full closed-
loop encoder is ro-
tating.
Status when error
pp y
i
g
occurs
p
p
Pn205 (absolute en-
coder rotation limit
setting) changed.
Pn205 (absolute en-
coder rotation limit
setting) changed by
mistake.
Servomotor power
or encoder line is
wired incorrectly.
Locked mechanical-
ly
Control panel error
Servomotor power
or encoder line is
miswired.
Gain adjustment is
insufficient.
Acceleration and de-
celeration is too vio-
lent.
Load is too large.
Pn002.3 (fully-
closed encoder
usage method) is
not set correctly.
Pn206 (number of
fully-closed encoder
pulses) is not set
correctly.
Pn51A (motor-load
deviation over level)
is not set correctly.
The machinery is
not operating prop-
erly.
Slipping is occurring
in the power trans-
mission.
Fully-closed encod-
er wiring error.
Fully-closed encod-
er is defective.
Option Unit is defec-
tive.
Cause of error
Perform absolute encod-
er rotation limit setting
change (Fn013).
Set Pn205 correctly
Rewire correctly.
Repair if the Servomotor
shaft is locked
Replace the Servo Driver.
Rewire correctly.
Adjust the gain.
Lengthen acceleration
and deceleration time.
Use position command
filter (Pn207.0, Pn204,
and Pn208).
Lighten the load.
Reselect the Servomotor.
Correct the setting of
Pn002.3.
Correct the setting of
Pn206.
Correct the setting of
Pn51A according to the
machinery.
Check the machinery.
Set Pn51A to 0 so that
A.d1 is not detected.
Wire the fully-closed en-
coder correctly.
Replace the fully-closed
encoder.
Replace the Option Unit.
Countermeasures
Chapter 5
5-15
Related parts for R88M-WP20030T-BWS1
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
![G6S-2G](/images/no-image3.png)
Part Number:
Description:
G6S-2GLow Signal Relay
Manufacturer:
Omron Corporation
Datasheet:
![G3NE-220T](/images/no-image3.png)
Part Number:
Description:
Compact, Low-cost, SSR Switching 5 to 20 A
Manufacturer:
Omron Corporation
Datasheet:
![G6K-2G-Y](/images/no-image3.png)
Part Number:
Description:
Manufacturer:
Omron Corporation
Datasheet:
![G4A-1A-E](/images/no-image3.png)
Part Number:
Description:
Manufacturer:
Omron Corporation
Datasheet:
![G5NB-1A-E](/images/no-image3.png)
Part Number:
Description:
Manufacturer:
Omron Corporation
Datasheet:
![G6B-2114P-US](/images/no-image3.png)
Part Number:
Description:
Manufacturer:
Omron Corporation
Datasheet:
![G6D-1A-ASI](/images/no-image3.png)
Part Number:
Description:
Manufacturer:
Omron Corporation
Datasheet:
![G8P-1A4P](/images/no-image3.png)
Part Number:
Description:
Manufacturer:
Omron Corporation
Datasheet: