95-21SYGC/S530-E2/TR7 Everlight Electronics Co Ltd, 95-21SYGC/S530-E2/TR7 Datasheet - Page 10
![no-image](/images/manufacturer_photos/0/2/240/everlight_electronics_co_ltd_sml.jpg)
95-21SYGC/S530-E2/TR7
Manufacturer Part Number
95-21SYGC/S530-E2/TR7
Description
LED SUBMINI 1.9MM ROUND DOME SMD
Manufacturer
Everlight Electronics Co Ltd
Specifications of 95-21SYGC/S530-E2/TR7
Lead Free Status / Rohs Status
Vendor undefined / RoHS Compliant
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Part Number:
95-21SYGC/S530-E2/TR7
Manufacturer:
EVERLIG
Quantity:
20 000
Precautions For Use
1. Over-current-proof
2. Storage
3. Soldering Condition
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
4.Soldering Iron
within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do
soldering of each terminal. Be careful because the damage of the product is often started at the time of
the hand solder.
Everlight Electronics Co., Ltd.
Device No. : SZDLE-952-010
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.
2.3After opening the package, the LEDs should be kept at 30℃ or less and 60%RH or less(Floor life).
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
Customer must apply resistors for protection , otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
However,it’s recommended that The LEDs should be used within 168 hours (7 days) after opening
the package.If unused LED remain, it should be stored in moisture proof packages.
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds
EVERLIGHT ELECTRONICS CO.,LTD.
Prepared date: 09-Nov-2005
http://www.everlight.com
95-21SYGC/S530-XX/XXX
Prepared by:Zhang huali
Rev. 2
Page: 10 of 11