65-21-G6C-B0P2R1B7E-2T8-AM Everlight Electronics Co Ltd, 65-21-G6C-B0P2R1B7E-2T8-AM Datasheet - Page 13

• Manufacturer Part Number: 65-21-G6C-B0P2R1B7E-2T8-AM
• Description: LED MINI TOPLED PLCC SMD
• Manufacturer: Everlight Electronics Co Ltd

Specifications of 65-21-G6C-B0P2R1B7E-2T8-AM

• Lead Free Status / Rohs Status: Contains lead / RoHS Compliant

Revision
LifecyclePhase:
Technical Data Sheet
Mini Top View LEDs
Note: Tolerances unless mentioned ±0.1mm. Unit = mm
2. Current limiting
3. Storage
4. Iron Soldering
5. Usage
Application Restrictions
Everlight Electronics Co., Ltd.
Device No.:
High reliability applications such as military/aerospace, automotive safety/security systems,
and medical equipment may require different product. If you have any concerns, please contact
Everlight before using this product in your application. This specification guarantees the quality
and performance of the product as an individual component. Do not use this product beyond the
specification described in this document.
A resistor should be used to limit current spikes that can be caused by voltage fluctuations.
Otherwise damage could occur.
3.1 Moisture proof bag should only be opened immediately prior to usage.
3.2 Environment should be less than 30°C and 90% RH when moisture proof bag is opened.
3.3 After opening the package MSL Conditions stated on page 1 of this spec should not be
3.4 If the moisture sensitivity card indicates higher than acceptable moisture, the component
Hand soldering is not recommended for regular production. These guidelines are for rework only.
Soldering iron tip should contact each terminal no more than 3 sec at 350°C, using soldering iron
with nominal power less than 25W. Allow min. 2 sec. between soldering intervals.
Do not exceed the values given in this specification.
: 1
exceeded.
should be baked at min. 60deg +/-5deg for 25 hours.
DSE-0000715
EVERLIGHT ELECTRONICS CO., LTD.
http://www.everlight.com
Prepared date: 25-August-2008 Created by:
65-21-G6C-B0P2R1B7E-2T8-AM
Rev.:
Release Date:2009-01-15 08:54:21.0
Expired Period: Forever
1.0
Tini Lin
Page:
13 of 13