MCY98-53-120A MULTICOMP, MCY98-53-120A Datasheet - Page 4
![ALTERNATING LOAD RELAY, DPDT, 12A](/photos/40/8/400896/4768460_sml.jpg)
MCY98-53-120A
Manufacturer Part Number
MCY98-53-120A
Description
ALTERNATING LOAD RELAY, DPDT, 12A
Manufacturer
MULTICOMP
Datasheet
1.MCY98-57-120A.pdf
(4 pages)
Specifications of MCY98-53-120A
Contact Current Max
12A
Contact Voltage Ac Nom
240V
Contact Voltage Dc Nom
30V
Contact Configuration
DPDT
Relay Mounting
Plug In
Average Power Consumption
1.8VA
External Height
65mm
Rohs Compliant
Yes
Operation
Wiring Diagram :
MCY98-54
11 Pin Octal with a DPDT
Contact Configuration.
Pin 9 is Normally Closed
and Pin 11 is Normally
Open.
If the top toggle switch is in “ Alternate” position closing switch S1 will alternate the loads between LA and LB.
If the top toggle switch is in “Lock 1” position load LA is On and load LB is OFF. Switch S1 is not used in the mode.
If the top toggle switch is in “Lock 2” position load LA is OFF and load LB is ON. Switch S1 is not used in the mode.
Note : Input voltage must be applied at all times for proper alternation. The use of a solid state control switch for S1 or S2 may not
initiate alternation correctly. S1 or S2 voltage must be from the same supply as the unit’s input voltage (see wiring diagrams). Loss of
input voltage resets unit; Load a becomes the lead for the next operation.
Wiring Diagram :
MCY98-55
11 Pin Octal with a DPDT
Contact Configuration.
Pin 9 is Normally Closed
and Pin 11 is Normally
Open.
If the top toggle switch is in “ Alternate” position closing switch S1 will alternate the loads between LA and LB.
If the top toggle switch is in “Lock 1” position load LA is On and load LB is OFF. Switch S1 is not used in the mode.
If the top toggle switch is in “Lock 2” position load LA is OFF and load LB is ON. Switch S1 is not used in the mode.
Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of
it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces
all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use
made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted.
Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising)
is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. © Premier Farnell plc 2011.
www.element14.com
www.farnell.com
www.newark.com
Alternating Relays
MCY98 Series
Page <4>
V is Input Voltage
LA is Load #1
LB is Load #2
S1 is Control Switch #1
V is Input Voltage
LA is Load #1
LB is Load #2
S1 is Control Switch #1
04/08/11 V1.1