Z500-MC10-T Omron, Z500-MC10-T Datasheet - Page 7
![no-image](/images/manufacturer_photos/0/4/494/omron_sml.jpg)
Z500-MC10-T
Manufacturer Part Number
Z500-MC10-T
Description
LASER SENSOR CONTROLLER
Manufacturer
Omron
Datasheet
1.Z500-MC10-T.pdf
(8 pages)
Specifications of Z500-MC10-T
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Other names
Z500MC10T
Monitor
Laser Safety
The Z500-SW2T Sensor Head is a Class 2 Laser Product ac-
cording to EN60825-1 (IEC60825-1) and Class II Laser Prod-
uct according to FDA (21 CFR1040.10) (see note). The
Z500-SW6 and Z500-SW17 Sensor Heads are Class 3B and
Class IIIB Laser Products, respectively. The Z500 Series is
meant to be built into final system equipment. Pay special at-
tention to the following precautions for the safe use of the
product:
Note: Europe: Class 2 and Class 3B of EN60825-1: 1994 = IEC60825-1: 1993
Dimensions (Unit: mm)
Sensor
Z500-SW2T
Z500
Item
Panel size
Panel type
Resolution
Input signal
Power supply voltage
Current consumption
Ambient temperature
Ambient humidity
Weight (including packaging)
Accessories
Wavelength
Maximum pulse duration 10 ms
Cycle
Peak power
Class
U.S.A.: Class II and Class IIIB of FDA (21 CFR1040.10)
650 nm
0.5 to 10 ms
1 mW max.
2
Z500-SW2T
Receiver
Light
Monitor
Model
26.4
12
5.5 inches
TFT color liquid crystal
320 × 240 dots
NTSC composite video (1.0 V/75 Ω)
20.4 to 26.4 VDC
Approx. 700 mA
Operating: 0 to +50 °C, Storage: -25 to +65 °C (with no icing or condensation)
Operating and storage: 35 to 85 %RH (with no condensation)
Approx. 870 g (Unit: Approx. 610 g)
Operation manual, 4 mounting brackets
Emitter
Monitor
3
Reference plane
Measurement center
Reception axis
658 nm
17.5 ms
0.5 to 25 ms
15 mW max.
3B
Z500-SW6/Z500-SW17
Reference plane
Emission axis
Optical axis
Vinyl-insulated round cable 6.8 dia.
Standard length: 2 m
(4)
16
20
4
18.1
65
57
20
Two, 4.5-dia. holes
(1)Use this product as specified in the operation manual. Oth-
(2)The Z500 series radiates laser beams in the visible light
(3)To avoid exposure to hazardous laser radiation, do not dis-
(4)The user should return the product to OMRON for all repair
(5)As for countries other than those of Europe and the U.S.A.,
erwise, you may be exposed to hazardous laser radiation.
range. Do not expose your eyes directly to the laser radi-
ation. Ensure that the laser beam path is terminated dur-
ing use. If a mirror or shiny surface is positioned in the
laser beam path, ensure that the reflected beam path is
also terminated. If the Unit must be used without terminat-
ing the laser beam path, position the laser beam path so
that it is not at eye level.
place nor remove the protective housing during operation,
maintenance, and any other servicing.
and servicing.
observe the regulations and standards specified by each
country.
Liquid Crystal Monitor
Operation indicators
F150-M05L
Connector
4
17 dia.
B-51