MT9234ZBA-V-NAM Multi-Tech Systems, MT9234ZBA-V-NAM Datasheet - Page 17

• Manufacturer Part Number: MT9234ZBA-V-NAM
• Description: MODEM V.92 DATA/FAX/VOICE WORLD
• Manufacturer: Multi-Tech Systems
• Series: MultiModem® ZBAr

Specifications of MT9234ZBA-V-NAM

• Data Format: V.34, V.92
• Baud Rates: -
• Interface: RS-232
• Voltage - Supply: -
• Mounting Type: Desktop
• Package / Case: 5.7" L x 4.3" W x 1.0" H (145mm x 109mm x 25mm)
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 881-1145

Multi-Tech Systems, Inc. MT9234ZBA-Series User Guide (S000387D)
Extension-Entry Callback
Use this procedure when calling from an extension at the callback number. The password that you use must be set up for
an optional extension-entry callback.
1.
2.
3.
4.
5.
6.
7.
8.
Direct Connection
Use this procedure when you want to connect without first being called back. The password that you use must be set up
for an optional direct connection.
1.
2.
3.
4.
Note:
Using a data communications program such as HyperTerminal, dial the number of the callback modem.
When the connection is established, the callback modem responds with the following message:
Password>
Type an extension-entry password, press the plus key (+), type the extension to call back to, and press E
have three attempts or one minute to enter a valid password.
If the password is valid, the following message appears, and the modems disconnect:
OK Disconnecting
After the delay specified by the #CBDn command, the callback modem calls the extension that you entered after the
+ character. If the callback modem is unable to establish a connection, it tries again, up to the number of attempts
specified by the #CBAn command.
After the modems reconnect, the following message reappears:
Password>
Type the same password you used to initiate the call. You are allowed three attempts to enter the password. After
that, you will be disconnected.
If the password is valid, the following message appears, and the modems establish a working connection:
OK Connecting
Using a data communications program such as HyperTerminal, dial the number of the callback modem.
When the connection is established, the callback modem responds with the following message:
Password>
Type a direct connection password, press the - key, and then press E
enter a valid password.
If the password is valid, the following message appears and the modems establish a working connection:
OK Connecting
You can make all calls direct connect regardless of whether the password or phone number has the - character by
using the %H1 command.
NTER
. You have three attempts or one minute to
Chapter 5 – Callback Security
NTER
. You
17