AD9058ATJ/883B Analog Devices Inc, AD9058ATJ/883B Datasheet - Page 11

• Manufacturer Part Number: AD9058ATJ/883B
• Description: IC ADC 8BIT DUAL 50MSPS 44-JLCC
• Manufacturer: Analog Devices Inc

Specifications of AD9058ATJ/883B

• Lead Free Status / Rohs Status: Contains lead / RoHS non-compliant
• Other names: Q6367495

DSCC FORM 2234
APR 97
(see 3.5 herein).
and V or MIL-PRF-38535, appendix A for device class M.
equipment), design applications, and logistics purposes.
specification or drawing.
individual documents. This coordination will be accomplished using DD Form 1692, Engineering Change Proposal.
requires configuration control and which SMD's are applicable to that system. DSCC will maintain a record of users and this list will
be used for coordination and distribution of changes to the drawings. Users of drawings covering microelectronic devices (FSC
5962) should contact DSCC-VA, telephone [phone].
692-0547.
MIL-PRF-38535 and MIL-HDBK-1331.
vendors listed in QML-38535 have submitted a certificate of compliance (see 3.6 herein) to DSCC-VA and have agreed to this
drawing.
vendors listed in MIL-HDBK-103 have agreed to this drawing and a certificate of compliance (see 3.6 herein) has been submitted to
and accepted by DSCC-VA.
4.4.4 Group E inspection. Group E inspection is required only for parts intended to be marked as radiation hardness assured
5. PACKAGING
5.1 Packaging requirements. The requirements for packaging shall be in accordance with MIL-PRF-38535 for device classes Q
6. NOTES
6.1 Intended use. Microcircuits conforming to this drawing are intended for use for Government microcircuit applications (original
6.1.1 Replaceability. Microcircuits covered by this drawing will replace the same generic device covered by a contractor prepared
6.1.2 Substitutability. Device class Q devices will replace device class M devices.
6.2 Configuration control of SMD's. All proposed changes to existing SMD's will be coordinated with the users of record for the
6.3 Record of users. Military and industrial users should inform Defense Supply Center Columbus when a system application
6.4 Comments. Comments on this drawing should be directed to DSCC-VA , Columbus, Ohio 43216-5000, or telephone (614)
6.5 Abbreviations, symbols, and definitions. The abbreviations, symbols, and definitions used herein are defined in
6.6 Sources of supply.
6.6.1 Sources of supply for device classes Q and V. Sources of supply for device classes Q and V are listed in QML-38535. The
6.6.2 Approved sources of supply for device class M. Approved sources of supply for class M are listed in MIL-HDBK-103. The
a.
b.
c.
DEFENSE SUPPLY CENTER COLUMBUS
End-point electrical parameters shall be as specified in table II herein.
For device classes Q and V, the devices or test vehicle shall be subjected to radiation hardness assured tests as specified
in MIL-PRF-38535 for the RHA level being tested. For device class M, the devices shall be subjected to radiation
hardness assured tests as specified in MIL-PRF-38535, appendix A for the RHA level being tested. All device classes
must meet the post irradiation end-point electrical parameter limits as defined in table I at T
exposure, to the subgroups specified in table II herein.
When specified in the purchase order or contract, a copy of the RHA delta limits shall be supplied.
MICROCIRCUIT DRAWING
COLUMBUS, OHIO 43216-5000
STANDARD
SIZE
A
REVISION LEVEL
B
A
= +25 C 5 C, after
SHEET
5962-94703
11