LB1848M-TRM-H ON Semiconductor, LB1848M-TRM-H Datasheet - Page 4

• Manufacturer Part Number: LB1848M-TRM-H
• Description: GENERAL-PURPOSE DRIVER
• Manufacturer: ON Semiconductor

Specifications of LB1848M-TRM-H

• Motor Type: Stepper
• No. Of Outputs: 2
• Output Current: 400mA
• Output Voltage: 550mV
• Supply Voltage Range: 2.5V To 7.5V
• No. Of Pins: 10
• Operating Temperature Range: -20°C To +75°C
• Svhc: No SVHC (20-Jun-2011)
• Rohs Compliant: Yes
• Lead Free Status / Rohs Status: Details

Block Diagrams
[LB1846M]
[LB1848M]
Note: When the “soft off” function is used, a capacitor must be connected to the SOF pin. If this function is not used, this pin must be left open with absolutely
Notes on Wiring and Lines
Since large currents flow in the V
should be observed if such oscillations occur.
(1) Lower the line impedances by making them shorter and thicker.
(2) Attach capacitors close to the IC.
(3) If the controller (CPU) is mounted on a separate printed circuit board, insert series resistors (of about 10 kΩ)
no signals or lines connected.
between the controller outputs and this IC.
CC
and ground lines, oscillations may occur on these lines. The following points
LB1846M, 1848M
No. 5339-4/8