LFXP10C-4F388C Lattice, LFXP10C-4F388C Datasheet - Page 230

• Manufacturer Part Number: LFXP10C-4F388C
• Description: IC FPGA 9.7KLUTS 244I/O 388-BGA
• Manufacturer: Lattice

Specifications of LFXP10C-4F388C

• Lead Free Status / Rohs Status: Contains lead / RoHS non-compliant

Lattice Semiconductor
Figure 10-12. READ Data Transfer When DDRCLKPOL=0
DDRCLKPOL= 0
IO REGISTERS
Notes -
CLK TO SYNC
(1) DDR memory sends DQ aligned to DQS strobe.
(2) The DQS Strobe is delayed by 90 degree using the dedicated DQS logic.
(3) DQ is now center aligned to DQS Strobe.
(4) PRMBDET is the Preamble detect signal generated using the DQSBUFB primitive. This is used to
(5) The first set of IO registers A and B, capture data on the positive edge and negative edge of DQS.
(6) IO register C transfers data so that both data are now aligned to negative edge of DQS.
(7) DDCLKPOL signal generated will determine if the CLK going into the synchronization registers need to
(8) The IO Synchronization registers capture data at on positive edge of the FPGA CLK.
DQS at PIN
DQS at IOL
FPGA CLK
PRMBDET
generate the DDRCLKPOL signal.
be inverted. In this case, the DDRCLKPOL=0 as the CLK is LOW at the 1
DATAIN_P
DATAIN_N
DQ at PIN
DQ at IOL
C
A
B
P0
P0
10-11
N0
N0
P0
P1
P1
N0
P0
N1
P1
N1
P0
N0
N1
P1
st
LatticeECP/EC and LatticeXP
rising edge of PRMBDET.
DDR Usage Guide