DS90C124QVSX National Semiconductor, DS90C124QVSX Datasheet - Page 19
DS90C124QVSX
Manufacturer Part Number
DS90C124QVSX
Description
Manufacturer
National Semiconductor
Datasheet
1.DS90C124QVSX.pdf
(26 pages)
Specifications of DS90C124QVSX
Lead Free Status / Rohs Status
Not Compliant
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
DS90C124QVSX
Manufacturer:
NSC
Quantity:
1 172
Company:
Part Number:
DS90C124QVSX/NOPB
Manufacturer:
TI/NS
Quantity:
700
Company:
Part Number:
DS90C124QVSX/NOPB
Manufacturer:
Texas Instruments
Quantity:
10 000
lines help to ensure that coupled noise will appear as com-
mon-mode and thus is rejected by the receivers. The tightly
coupled lines will also radiate less.
Termination of the LVDS interconnect is required. For point-
to-point applications, termination should be located at both
ends of the devices. Nominal value is 100 Ohms to match the
line’s differential impedance. Place the resistor as close to the
transmitter DOUT± outputs and receiver RIN± inputs as pos-
sible to minimize the resulting stub between the termination
resistor and device.
LVDS INTERCONNECT GUIDELINES
See AN-1108 and AN-905 for full details.
•
•
Use 100Ω coupled differential pairs
Use the S/2S/3S rule in spacings
FIGURE 17. AC Coupled Application
19
•
•
•
•
•
Additional general guidance can be found in the LVDS
Owner’s Manual - available in PDF format from the National
web site at: www.national.com/lvds
—S = space between the pair
—2S = space between pairs
—3S = space to LVCMOS/LVTTL signal
Minimize the number of VIA
Use differential connectors when operating above
500Mbps line speed
Maintain balance of the traces
Minimize skew within the pair
Terminate as close to the TX outputs and RX inputs as
possible
20171918
www.national.com