MAX492CSA-T Maxim Integrated Products, MAX492CSA-T Datasheet - Page 13

• Manufacturer Part Number: MAX492CSA-T
• Description: Op Amps Dual uPower Single Supply Rail-Rail
• Manufacturer: Maxim Integrated Products

Specifications of MAX492CSA-T

• Number Of Channels: 2
• Voltage Gain Db: 110 dB
• Common Mode Rejection Ratio (min): 74 dB
• Input Offset Voltage: 0.5 mV
• Operating Supply Voltage: 3 V or 5 V
• Maximum Power Dissipation: 471 mW
• Maximum Operating Temperature: + 70 C
• Mounting Style: SMD/SMT
• Package / Case: SOIC-8 Narrow
• Maximum Dual Supply Voltage: +/- 3 V
• Minimum Operating Temperature: 0 C

in series with IN-, IN+, or both. Series resistors are not
recommended for amplifier applications, as they may
increase input offsets and decrease amplifier bandwidth.
Even with their low quiescent current of less than 150µA
per op amp, the MAX492/MAX494/MAX495 are well
suited for driving loads up to 1kΩ while maintaining DC
accuracy. Stability while driving heavy capacitive loads
is another key advantage over comparable CMOS rail-
to-rail op amps.
Single/Dual/Quad, Micropower,
Single-Supply Rail-to-Rail Op Amps
Figure 6. MAX492 Voltage Follower with 1000pF Load
(R
Figure 7a. MAX492 Voltage Follower with 500pF Load—
R
12
L
L
= 5k Ω
= ∞ )
______________________________________________________________________________________
Output Loading and Stability
10 s/div
10 s/div
V
50mV/div
V
50mV/div
V
50mV/div
V
50mV/div
IN
OUT
IN
OUT
In op amp circuits, driving large capacitive loads
increases the likelihood of oscillation. This is especially
true for circuits with high loop gains, such as a unity-
gain voltage follower. The output impedance and a
capacitive load form an RC network that adds a pole to
the loop response and induces phase lag. If the pole
frequency is low enough—as when driving a large
capacitive load—the circuit phase margin is degraded,
leading to either an under-damped pulse response or
oscillation.
Figure 7b. MAX492 Voltage Follower with 500pF Load—
R
Figure 7c. MAX492 Voltage Follower with 500pF Load—
R
L
L
= 20k Ω
= ∞
10 s/div
10 s/div
V
50mV/div
V
50mV/div
V
50mV/div
V
50mV/div
IN
OUT
IN
OUT