LM2619ATLX National Semiconductor, LM2619ATLX Datasheet - Page 15

• Manufacturer Part Number: LM2619ATLX
• Description: Conv DC-DC Single Step Down 2.8V to 5.5V 10-Pin uSMD T/R
• Manufacturer: National Semiconductor
• Type: Step Downr

Specifications of LM2619ATLX

• Package: 10uSMD
• Number Of Outputs: 1
• Minimum Input Voltage: 2.8 V
• Maximum Input Voltage: 5.5 V
• Switching Frequency: 500 to 1000 KHz
• Operating Supply Voltage: 2.8 to 5.5 V
• Maximum Output Current: 0.5 A
• Output Type: Adjustable
• Output Voltage: 1.5 to 3.6 V
• Switching Regulator: Yes
• Efficiency: 96(Typ) %
• Operating Temperature: -25 to 125 °C

National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.
LIFE SUPPORT POLICY
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL
COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are devices or
Physical Dimensions
NOTES: UNLESS OTHERWISE SPECIFIED
1. EPOXY COATING
2. 63Sn/37Pb EUTECTIC BUMP
3. RECOMMEND NON-SOLDER MASK DEFINED LANDING PAD.
4. PIN A1 IS ESTABLISHED BY LOWER LEFT CORNER WITH RESPECT TO TEXT ORIENTATION.
5. XXX IN DRAWING NUMBER REPRESENTS PACKAGE SIZE VARIATION WHERE X1 IS PACKAGE WIDTH, X2 IS PACKAGE LENGTH AND X3 IS
PACKAGE HEIGHT.
6. REFERENCE JEDEC REGISTRATION MO-211. VARIATION BD.
www.national.com
systems which, (a) are intended for surgical implant
into the body, or (b) support or sustain life, and
whose failure to perform when properly used in
accordance with instructions for use provided in the
labeling, can be reasonably expected to result in a
significant injury to the user.
National Semiconductor
Americas Customer
Support Center
Email: [e-mail]
Tel: [phone]
National Semiconductor
Europe Customer Support Center
Deutsch Tel: [phone]
English
Français Tel: [phone]
inches (millimeters) unless otherwise noted
The dimensions for X1, X2 and X3 are as given:
Email: [e-mail]
Fax: [phone]
Tel: [phone]
NS Package Number TLP106WA
10-Bump micro SMD Package
X1 = 2.250
X2 = 2.504
X3 = 0.600
±
±
±
0.030 mm
0.030 mm
0.075 mm
2. A critical component is any component of a life
support device or system whose failure to perform
can be reasonably expected to cause the failure of
the life support device or system, or to affect its
safety or effectiveness.
National Semiconductor
Asia Pacific Customer
Support Center
Email: [e-mail]
National Semiconductor
Japan Customer Support Center
Fax: [phone]
Email: [e-mail]
Tel: [phone]