V15W11-WZ200A02-AW1 Honeywell Sensing and Control, V15W11-WZ200A02-AW1 Datasheet - Page 2

• Manufacturer Part Number: V15W11-WZ200A02-AW1
• Description: SWITCH SNAP SPDT 0.1A 125V
• Manufacturer: Honeywell Sensing and Control
• Series: V15Wr

Specifications of V15W11-WZ200A02-AW1

• Mfg Application Notes: Watertight Switches Transportation Applications
• Circuit: SPDT
• Switch Function: On-Mom
• Contact Rating @ Voltage: 0.1A @ 125VAC
• Actuator Type: Lever, Straight
• Mounting Type: Chassis Mount
• Termination Style: Wire Leads
• Operating Force: 120gf
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 480-3753

MICRO SWITCH™ V-Basic Standard
V15W Watertight
• The switch is sealed around the terminals. However, live
WIRING INFORMATION - PRE-LEADED VERSIONS
• Provide strain relief when a potential exists for forces to
• When wiring molded lead wire models, ensure that there
CIRCUIT INFORMATION
A circuit diagram is included on the switch case labeling
each of the terminals/wires. The normal position
corresponds to the switch plunger in its released position.
SOLDERING GUIDELINES
When hand soldering the switch’s terminals, do not
exceed three seconds at 260 °C [508 °F]. Contacting the
switch housing with the soldering device may damage
the switch housing. Solder joints must not be moved for
at least one minute after soldering.
Do not try to clean the switch with a solvent or similar
substance after the soldering process
ENVIRONMENTAL OPERATING CHARACTERISTICS
Sensing and Control
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422
www.honeywell.com/sensing
Operating
temperature range
Humidity
Rate of actuation
Operating frequency
(electrical)
Operating frequency
(mechanical)
terminals should never be exposed to water. Use
appropriate sealed connectors or mount the switch in a
sealed enclosure so that the terminals are not exposed
to water.
be transferred from the lead wires to the switch.
is no weight on the wire and that there are no sharp
bends.
-40 °C to 85 °C [-40 °F to 185 °F]
95% max.
0.1 mm/s to 1000 mm/s
30 operations/minute max.
200 operations/minute max.
Switches
50066512-001-EN IL50 GLO Printed in USA
September 2011
Copyright © 2011 Honeywell International Inc. All rights reserved.
WARRANTY/REMEDY
Honeywell warrants goods of its manufacture as being free of
defective materials and faulty workmanship. Honeywell’s
standard product warranty applies unless agreed to otherwise by
Honeywell in writing; please refer to your order
acknowledgement or consult your local sales office for specific
warranty details. If warranted goods are returned to Honeywell
during the period of coverage, Honeywell will repair or replace,
at its option, without charge those items it finds defective. The
foregoing is buyer’s sole remedy and is in lieu of all other
warranties, expressed or implied, including those of
merchantability and fitness for a particular purpose. In no
event shall Honeywell be liable for consequential, special,
or indirect damages.
While we provide application assistance personally, through our
literature and the Honeywell web site, it is up to the customer to
determine the suitability of the product in the application.
Specifications may change without notice. The information we
supply is believed to be accurate and reliable as of this printing.
However, we assume no responsibility for its use.
SALES AND SERVICE
Honeywell serves its customers through a worldwide network of
sales offices, representatives and distributors. For application
assistance, current specifications, pricing or name of the nearest
Authorized Distributor, contact your local sales office or:
E-mail: [e-mail]
Internet: www.honeywell.com/sensing
Phone and Fax:
Asia Pacific
Europe
Latin America [phone]; [phone] Fax
USA/Canada [phone]; [phone]
[phone]; [phone] Fax
[phone]; [phone] Fax
[phone] Fax
Issue 1 50066512