030-2415-003 ITT Cannon, LLC, 030-2415-003 Datasheet - Page 60

• Manufacturer Part Number: 030-2415-003
• Description: DL CONT CRIMP 18-20 50AU
• Manufacturer: ITT Cannon, LLC
• Series: DLr
• Type: Signalr

Specifications of 030-2415-003

• Pin Or Socket: Non-Gendered
• Contact Termination: Crimp
• Wire Gauge: 18-20 AWG
• Contact Finish: Gold
• Contact Finish Thickness: 20µin (0.51µm)
• Current Rating: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• For Use With: 1003-1679 - DLM 156C SHILDED PLUG1003-1680 - DLM 96C SHIELDED PLUGI111986-0014 - CONN ZIF 260POS PLUGI127050-0204 - CONN PLUG 156POSI127050-0212 - CONN PLUG 96POS1003-1097 - PLUG HOUSING 60POS ZIF1003-1095 - PLUG HOUSING 96POS ZIF1003-1092 - PLUG HOUSING 156POS ZIF
• Other names: 030-2415-003; 302415003; I030-2415-003; I030-2415-003

ZIF Connectors
Lease Automatic Tooling — North America*
ABT-607 Pneumatic Crimper
ABT-500 UCCD
ABT-620 UCCS
*For other geographical regions, contact Cannon for details.
The ABT-607 is a pneumatic powered and
controlled machine. It is designed for customers
with moderate volume. This machine is designed
to semi-automatically crimp stamped and formed
contacts onto pre-stripped stranded or single
conductor electrical wire. This machine will
accommodate size 34 thru 12 AWG wire and is
actuated by the use of a foot pedal.
The ABT-500 Universal Cannon Crimp Die, is a
flywheel driven, electronically controlled machine
that is designed to semi-automatically crimp
stamped and formed contacts on stranded or
single conductor, pre-stripped wire. This machine
will accommodate size 34 thru 12 AWG wire. The
primary application of this machine is for
terminating discrete, pre-stripped, wire. The
machine is actuated by the use of a foot pedal.
The ABT-620 Universal Cannon Crimper/Stripper
is a pneumatic powered, microprocessor
controlled machine. It is designed to semi-
automatically strip insulation from stranded or
single conductor electrical wire and attach a
stamped and formed contact by crimping. The
machine will accommodate 34 thru 12 AWG wire.
Primary application of the machine is the
termination of jacketed cable where the individual
leads cannot be stripped by fully automated
equipment. The ABT-620 UCCS operates
automatically upon insertion of a wire or it can be
switched over to foot pedal operation as desired.
Machine Crimp Rate:
800 per hour
Power Requirements:
Pneumatic = 100 psi, 2 cu. ft. per min.
Machine Crimp Rate:
1300 per hour
Power Requirements:
Electrical = 115 VAC, 60 Hz, 20A
Machine Strip/Crimp Rate:
1200+ per hour
Power Requirements:
Electrical = 115 VAC, 60 Hz, 20A
Pneumatic = 80 psi, 3 cu. ft. per min.
Tools and Assembly
Dimensions are shown in mm (inch)
Dimensions subject to change
59