V23818-C18-L36 Infineon Technologies, V23818-C18-L36 Datasheet - Page 8

• Manufacturer Part Number: V23818-C18-L36
• Description: TXRX SGL MODE ATM 155MBD 1300NM
• Manufacturer: Infineon Technologies
• Series: -r

Specifications of V23818-C18-L36

• Data Rate: 155Mbps
• Wavelength: 1300nm
• Applications: Ethernet
• Voltage - Supply: 3.15 V ~ 3.45 V
• Connector Type: LC Duplex
• Mounting Type: PCB
• Lead Free Status / Rohs Status: Contains lead / RoHS non-compliant
• Other names: V23818-C18-L36IN

Single Mode 155 MBd 2x5 Transceiver AC/AC
Values of R1/2/3/4 may vary as long as proper 50
to V
Published by Infineon Technologies AG
©
All Rights Reserved
Attention please!
The information herein is given to describe certain components and shall not be
considered as warranted characteristics.
Terms of delivery and rights to technical change reserved.
We hereby disclaim any and all warranties, including but not limited to warranties
of non-infringement, regarding circuits, descriptions and charts stated herein.
Infineon Technologies is an approved CECC manufacturer.
Information
For further information on technology, delivery terms and conditions and prices
please contact the Infineon Technologies offices or our Infineon Technologies
Representatives worldwide - see our webpage at
www.infineon.com/fiberoptics
Infineon Technologies AG • Fiber Optics • Wernerwerkdamm 16 • Berlin D-13623, Germany
Infineon Technologies, Inc. • Fiber Optics • 1730 North First Street • San Jose, CA 95112, USA
Infineon Technologies K.K. • Fiber Optics • Takanawa Park Tower • 20-14, Higashi-Gotanda, 3-chome, Shinagawa-ku • Tokyo 141, Japan
Infineon Technologies AG 2002
L1/2
C1/2/3
R1/2
EE
or 100
= 1 ... 4.7 µH
= 4.7 ... 10 µF
= Depends on SerDes chip used
SFF Transceiver
V23818-C18-L45/L46/L47/L49/
Pre-
Amp
differential is provided. The power supply filter-
Laser
Driver
L745/L747/L79
Limiting
Amplifier
Signal
Detect
RD
RD+
100
RxV
TxV
RxV
TxV
TxDis
RD+
TD+
RD
TD
SD
CC
CC
EE
EE
termination
7
10
8
6
2
3
4
5
1
9
Tx Disable
C1
C2
R3/4
R7/8
Place R1/2/3/4/7/8 close to SerDes chip
ing is required for good EMI performance. Use short tracks
from the inductor L1/L2 to the module V
Warnings
Due to technical requirements components may contain dangerous substances.
For information on the types in question please contact your Infineon Technologies
offices.
Infineon Technologies Components may only be used in life-support devices or
systems with the express written approval of Infineon Technologies, if a failure of
such components can reasonably be expected to cause the failure of that
life-support device or system, or to affect the safety or effectiveness of that device
or system. Life support devices or systems are intended to be implanted in the
human body, or to support and/or maintain and sustain and/or protect human life.
If they fail, it is reasonable to assume that the health of the user or other persons
may be endangered.
SD
L1
L2
= Depends on SerDes chip used
= Biasing (depends on SerDes chip)
V
3.3 V
CC
C3
V
CC
SerDes
V
SerDat Out
SerDat Out
SerDat In
SerDat In +
CC
Serializer/
Deserializer
CC
+
Rx/V
Receiver
PLL etc.
CC
ECL/
PECL
Driver
Tx.