SI3230-KT Silicon Laboratories Inc, SI3230-KT Datasheet - Page 91

• Manufacturer Part Number: SI3230-KT
• Description: IC SLIC PROG 1-CH 38TSSOP
• Manufacturer: Silicon Laboratories Inc
• Series: ProSLIC®r

Specifications of SI3230-KT

• Package / Case: *
• Function: Subscriber Line Interface Concept (SLIC)
• Interface: SPI
• Number Of Circuits: 1
• Voltage - Supply: 3.13 V ~ 5.25 V
• Current - Supply: 88mA
• Power (watts): 700mW
• Mounting Type: Surface Mount
• Includes: DTMF Generation and Decoding, FSK Generation
• Product: SLIC
• Supply Voltage (min): 3.13 V
• Supply Current: 88 mA
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: 0 C
• Mounting Style: SMD/SMT
• Number Of Channels: 1
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Operating Temperature: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Contains lead / RoHS non-compliant

Bit
4
3
2
1
0
HYSTEN
ZSEXT
SWDB
DCFIL
Name
LCVE
Impedance Internal Reference Resistor Disable.
When enabled, this bit removes the internal reference resistor used to synthesize ac
impedances for 600 + 2.1 µF and 900 + 2.16 µF so that an external resistor reference
may be used.
0 = Internal resistor used to generate 600 + 2.1 µF and 900 + 2.16 µF impedances.
1 = Internal resistor removed from circuit.
Battery Switch Debounce.
When enabled, this bit allows debouncing of the battery switching circuit only when tran-
sitioning from V
0 = No debounce used.
1 = 60 ms debounce period used.
Voltage-Based Loop Closure.
Enables loop closure to be determined by the TIP-to-RING voltage rather than loop cur-
rent.
0 = Loop closure determined by loop current.
1 = Loop closure determined by TIP-to-RING voltage.
DC-DC Converter Squelch.
When enabled, this bit squelches noise in the audio band from the dc-dc converter con-
trol loop.
0 = Voice band squelch disabled.
1 = Voice band squelch enabled.
Loop Closure Hysteresis Enable.
When enabled, this bit allows hysteresis to the loop closure calculation. The upper and
lower hysteresis thresholds are defined by indirect registers 28 and 43, respectively.
0 = Loop closure hysteresis disabled.
1 = Loop closure hysteresis enabled.
BATH
to V
Preliminary Rev. 0.96
BATL
external battery supplies (EXTBAT = 1).
Function
Si3230
91