SI3225-BQ Silicon Laboratories Inc, SI3225-BQ Datasheet - Page 67
![IC SLIC/CODEC DUAL-CH 64TQFP](/photos/16/12/161288/tqfp-64_sml.jpg)
SI3225-BQ
Manufacturer Part Number
SI3225-BQ
Description
IC SLIC/CODEC DUAL-CH 64TQFP
Manufacturer
Silicon Laboratories Inc
Series
ProSLIC®r
Specifications of SI3225-BQ
Package / Case
*
Function
Subscriber Line Interface Concept (SLIC), CODEC
Interface
GCI, PCM, SPI
Number Of Circuits
2
Voltage - Supply
3.3V, 5V
Current - Supply
65mA
Power (watts)
941mW
Operating Temperature
-40°C ~ 85°C
Mounting Type
Surface Mount
Includes
Battery Switching, BORSCHT Functions, DTMF Generation and Decoding, FSK Tone Generation, Modem and Fax Tone Detection
Product
SLIC
Supply Voltage (min)
3.13 V
Supply Current
22 mA
Maximum Operating Temperature
+ 85 C
Minimum Operating Temperature
- 40 C
Mounting Style
SMD/SMT
Number Of Channels
2
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
SI3225-BQ
Manufacturer:
Silicon Laboratories Inc
Quantity:
10 000
Figures 45 and 46 illustrate WRITE and READ
operations to register addresses via a 16-bit SPI
controller. These operations require a 4-byte transfer
arranged as two 16-bit words. The absence of CS going
high after the eighth bit of data indicates to the SPI state
machine that eight more SCLK pulses follow to
complete the operation. For a WRITE operation, the last
eight bits are ignored. For a read operation, the 8-bit
data value repeats so that the data is captured during
the last half of a data transfer if required by the
controller.
During register accesses, the CONTROL, ADDRESS,
and DATA are captured in the SPI module. At the
completion of the ADDRESS byte of a READ access,
the contents of the addressed register move into the
data register of the SPI data register. At the completion
of the DATA byte of a WRITE access, the data is
transferred from the SPI to the addressed register.
Figures 47–50 illustrate the various cycles for accessing
RAM addresses. RAM addresses are 16-bit entities;
therefore, the accesses always require four bytes.
During RAM address accesses, the CONTROL,
ADDRESS, and DATA are captured in the SPI module.
At the completion of the ADDRESS byte of a READ
access, the contents of the channel-based data buffer
CS
SCLK
SDI
SDO
CS
SCLK
SDI
SDO
CONTROL
CONTROL
Figure 47. RAM Write Operation via an 8-Bit SPI Port
Figure 48. RAM Read Operation via an 8-Bit SPI Port
ADDRESS
ADDRESS
Preliminary Rev. 0.91
move into the data register in the SPI for shifting out
during the DATA portion of the SPI transfer. This is the
data loaded into the data buffer in response to the
previous RAM address read request. Therefore, there is
a one-deep pipeline nature to RAM address READ
operations. At the completion of the DATA portion of the
READ cycle, the ADDRESS is transferred to the
channel-based address buffer register and a RAM
address is logged for that channel. The RAMSTAT bit in
each channel is polled to monitor the status of RAM
address accesses that are serviced twice per sample
period at dedicated windows in the DSP algorithm.
A RAM access interrupt in each channel indicates that
the pending RAM access request is serviced. For a
RAM access, the ADDRESS and DATA is transferred
from the SPI registers to the address and data buffers in
the appropriate channel. The RAM WRITE request will
be then logged. As for READ operations, the status of
the pending request is monitored by either polling the
RAMSTAT bit for the channel or enabling the RAM
access interrupt for the channel. By keeping the
address, data buffers, and RAMSTAT register on a per
channel basis, RAM address accesses can be
scheduled for both channels without interface.
x x x x x x x x
DATA [15:8]
DATA [15:8]
Si3220/Si3225
x x x x x x x x
DATA [7:0]
DATA [7:0]
Hi-Z
67