SI2415-FTR Silicon Laboratories Inc, SI2415-FTR Datasheet - Page 35

• Manufacturer Part Number: SI2415-FTR
• Manufacturer: Silicon Laboratories Inc

Specifications of SI2415-FTR

• Lead Free Status / Rohs Status: Supplier Unconfirmed

Notes:
Command
1. When in autobaud mode, \B0, \B1, and \P1 will not be detected automatically. The combination of \B2 and \P3 will be
2. The autobaud feature does not detect this rate.
\Vn
\V0
\V2
\V4
detected. This is compatible with seven data bits, no parity, two stop bits. Seven data bits, no parity, one stop bit may be
forced by sending AT\T17\B1.
Table 13. Extended AT\ Command Set (Command Defaults in Bold) (Continued)
Connect message type
Report connect message and protocol message
Report connect message only (exclude protocol message)
Report connect and protocol message with both upstream and downstream connect rates.
Rev. 1.1
Action
Si2457/34/15/04
35