LM4934RLX/NOPB National Semiconductor, LM4934RLX/NOPB Datasheet - Page 25

IC AUDIO SUBSYSTEM 1.2W 42USMDXT

LM4934RLX/NOPB

Manufacturer Part Number
LM4934RLX/NOPB
Description
IC AUDIO SUBSYSTEM 1.2W 42USMDXT
Manufacturer
National Semiconductor
Series
Boomer®r
Type
Class ABr
Datasheet

Specifications of LM4934RLX/NOPB

Output Type
2-Channel (Stereo) with Mono and Stereo Headphones
Max Output Power X Channels @ Load
1.2W x 2 @ 8 Ohm; 80mW x 2 @ 32 Ohm
Voltage - Supply
2.7 V ~ 5.5 V
Features
3D, Depop, I²C, I²S, Mute, Shutdown, SPI, Volume Control
Mounting Type
Surface Mount
Package / Case
42-MicroSMDxt
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
LM4934RLX

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
LM4934RLX/NOPB
Manufacturer:
MAXIM
Quantity:
13 062
Interface Control Register
This register is used to control the I2S and I
INTERFACE (0Fh) (Set = logic 1, Clear = logic 0)
NOTES:
The master I2S format depends on the DAC mode. In USB mode the number of bits per word is 25 (i.e. 2.4MHz for a 48kHz sample rate). The duty cycle is 40/60.
In non-USB modes the format is 32 or 16 bits per word, depending on I2S_RESOLTION and the duty cycle is always 50-50. In slave mode it will decode any I2S
compatible data stream.
Bits
0
1
2
3
2
Register
I2S_MASTER_SLAVE
I2S_RESOLUTION
I2S_MODE
I2C_FAST
C compatible interface on the chip.
I2S Mode Timing
25
Description
If set the LM4934 acts as a master
for I2S, so both I2S clock and I2S
word select are configured as
outputs. If cleared the LM4934 acts
as a slave where both I2S clock and
word select are configured as inputs.
If set the I2S resolution is set to 32
bits. If clear, resolution is set to 16
bits. This bit only affects the I2S
Interface in master mode. In slave
mode the I2S Interface can support
any I2S compatible resolution. In
master mode the I2S resolution also
depends on the DAC mode as the
note below explains.
If set the I2S is configured in left
justified mode timing. If clear, the
I2S interface is configured in normal
I2S mode timing.
If set enables the I2C to run in fast
mode with an I2C clock up to
3.4MHz. If clear the I2C speed gets
its default value of a maximum of
400kHz
201669A9
www.national.com

Related parts for LM4934RLX/NOPB