93LC66A Microchip Technology Inc., 93LC66A Datasheet

no-image

93LC66A

Manufacturer Part Number
93LC66A
Description
Manufacturer
Microchip Technology Inc.
Datasheet

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
93LC66A
Manufacturer:
ROHM/罗姆
Quantity:
20 000
Part Number:
93LC66A DIP8
Manufacturer:
MICROCHIP
Quantity:
636
Part Number:
93LC66A-I/P
Manufacturer:
MICROCHIP
Quantity:
12 000
Part Number:
93LC66A-I/P
Manufacturer:
MIC
Quantity:
20 000
Part Number:
93LC66A-I/SN
Manufacturer:
MICROCHIP
Quantity:
12 000
Part Number:
93LC66A-I/SN
Manufacturer:
MICROCHIP
Quantity:
12 000
Part Number:
93LC66A-I/SN
Manufacturer:
MICROCHIP/微芯
Quantity:
20 000
Part Number:
93LC66A-I/ST
Manufacturer:
MICROCHIP
Quantity:
8 700
Part Number:
93LC66AT-E/SN
Manufacturer:
MICROCHIP/微芯
Quantity:
20 000
Part Number:
93LC66AT-I/SN
Manufacturer:
MICROCHIP/微芯
Quantity:
20 000
Company:
Part Number:
93LC66AT-I/SN
Quantity:
3 300
Company:
Part Number:
93LC66AT-I/ST
Quantity:
9 000
Device Selection Table
Features:
• Low-power CMOS technology
• ORG pin to select word size for ‘66C’ version
• 512 x 8-bit organization ‘A’ ver. devices (no ORG)
• 256 x 16-bit organization ‘B’ ver. devices (no
• Self-timed erase/write cycles (including
• Automatic ERAL before WRAL
• Power-on/off data protection circuitry
• Industry standard 3-wire serial I/O
• Device Status signal (Ready/Busy)
• Sequential read function
• 1,000,000 E/W cycles
• Data retention > 200 years
• Temperature ranges supported:
Pin Function Table
© 2005 Microchip Technology Inc.
93AA66A
93AA66B
93LC66A
93LC66B
93C66A
93C66B
93AA66C
93LC66C
93C66C
CS
CLK
DI
DO
V
NC
ORG
V
ORG)
auto-erase)
SS
CC
Part Number
- Industrial (I)
- Automotive (E)
Name
Chip Select
Serial Data Clock
Serial Data Input
Serial Data Output
Ground
No internal connection
Memory Configuration
Power Supply
4K Microwire Compatible Serial EEPROM
V
CC
1.8-5.5
1.8-5-5
2.5-5.5
2.5-5.5
4.5-5.5
4.5-5.5
1.8-5.5
2.5-5.5
4.5-5.5
Range
-40°C to +85°C
-40°C to +125°C
Function
ORG Pin
Yes
Yes
Yes
No
No
No
No
No
No
93AA66A/B/C, 93LC66A/B/C,
Word Size
8 or 16-bit
8 or 16-bit
8 or 16-bit
16-bit
16-bit
16-bit
8-bit
8-bit
8-bit
Description:
The Microchip Technology Inc. 93XX66A/B/C devices
are 4K bit low-voltage serial Electrically Erasable
PROMs (EEPROM). Word-selectable devices such as
the 93AA66C, 93LC66C or 93C66C are dependent
upon external logic levels driving the ORG pin to set
word size. For dedicated 8-bit communication, the
93XX66A devices are available, while the 93XX66B
devices provide dedicated 16-bit communication.
Advanced CMOS technology makes these devices
ideal for low-power, nonvolatile memory applications.
The entire 93XX Series is available in standard
packages including 8-lead PDIP and SOIC, and
advanced packaging including 8-lead MSOP, 6-lead
SOT-23, 8-lead 2x3 DFN and 8-lead TSSOP. Pb-free
(Pure Matte Sn) finish is available.
Temp Ranges
I, E
I, E
I, E
I, E
I, E
I, E
I
I
I
P, SN, ST, MS, OT, MC
P, SN, ST, MS, OT, MC
P, SN, ST, MS, OT, MC
P, SN, ST, MS, OT, MC
P, SN, ST, MS, OT, MC
P, SN, ST, MS, OT, MC
P, SN, ST, MS, MC
P, SN, ST, MS, MC
P, SN, ST, MS, MC
93C66A/B/C
Packages
DS21795C-page 1

Related parts for 93LC66A

93LC66A Summary of contents

Page 1

... Chip Select CLK Serial Data Clock DI Serial Data Input DO Serial Data Output V Ground internal connection ORG Memory Configuration V Power Supply CC © 2005 Microchip Technology Inc. 93AA66A/B/C, 93LC66A/B/C, ORG Pin Word Size Temp Ranges No 8-bit No 16-bit No 8-bit 16-bit 8-bit ...

Page 2

... Package Types (not to scale) ROTATED SOIC PDIP/SOIC (ex: 93LC46BX ORG CLK CLK TSSOP/MSOP SOT-23 (ST, MS) (OT CLK ORG DFN ...

Page 3

... ELECTRICAL CHARACTERISTICS (†) Absolute Maximum Ratings V .............................................................................................................................................................................7.0V CC All inputs and outputs w.r.t. V ..........................................................................................................-0. Storage temperature ...............................................................................................................................-65°C to +150°C Ambient temperature with power applied................................................................................................-40°C to +125°C ESD protection on all pins † NOTICE: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the device ...

Page 4

... TABLE 1-2: AC CHARACTERISTICS All parameters apply over the specified ranges unless otherwise noted. Param. Symbol Parameter No Clock frequency CLK A2 T Clock high time CKH A3 T Clock low time CKL A4 T Chip Select setup time CSS A5 T Chip Select hold time ...

Page 5

... FIGURE 1-1: SYNCHRONOUS DATA TIMING CSS CLK DIS (Read (Program Note relative to CS. SV TABLE 1-3: INSTRUCTION SET FOR X 16 ORGANIZATION (93XX66B OR 93XX66C WITH ORG = 1) Instruction SB Opcode ...

Page 6

... FUNCTIONAL DESCRIPTION When the ORG* pin is connected to V organization is selected. When it is connected to ground, the (x8) organization is selected. Instructions, addresses and write data are clocked into the DI pin on the rising edge of the clock (CLK). The DO pin is normally held in a High-Z state except when reading data from the device, or when checking the Ready/ Busy status during a programming operation ...

Page 7

... Erase The ERASE instruction forces all data bits of the speci- fied address to the logical ‘1’ state brought low following the loading of the last address bit. This falling edge of the CS pin initiates the self-timed program- ming cycle, except on ‘93C’ devices where the rising edge of CLK before the last address bit initiates the write cycle ...

Page 8

... Erase All (ERAL) The Erase All (ERAL) instruction will erase the entire memory array to the logical ‘1’ state. The ERAL cycle is identical to the erase cycle, except for the different opcode. The ERAL cycle is completely self-timed and commences at the falling edge of the CS, except on ‘ ...

Page 9

... Erase/Write Disable and Enable(EWDS/EWEN) The 93XX66A/B/C powers up in the Erase/Write Disable (EWDS) state. All Programming modes must be preceded by an Erase/Write Enable (EWEN) instruction. Once the EWEN instruction is executed, programming remains enabled until an EWDS instruction is executed or Vcc is removed from the device. ...

Page 10

... The WRITE instruction is followed by 8 bits (If ORG is low or A-version devices bits (If ORG pin is high or B-version devices) of data which are written into the specified address. For 93AA66A/B/C and 93LC66A/B/C devices, after the last data bit is clocked into DI, the falling edge of CS initiates the self-timed auto-erase and programming cycle ...

Page 11

... Write All (WRAL) The Write All (WRAL) instruction will write the entire memory array with the data specified in the command. For 93AA66A/B/C and 93LC66A/B/C devices, after the last data bit is clocked into DI, the falling edge of CS initiates the self-timed auto-erase and programming cycle ...

Page 12

... PIN DESCRIPTIONS TABLE 3-1: PIN DESCRIPTIONS SOIC/PDIP/ Name MSOP/TSSOP/ DFN CS 1 CLK ORG/ 3.1 Chip Select (CS) A high level selects the device; a low level deselects the device and forces it into Standby mode. However, a ...

Page 13

... PACKAGING INFORMATION 4.1 Package Marking Information 8-Lead MSOP (150 mil) XXXXXXT YWWNNN 6-Lead SOT-23 XXNN 8-Lead PDIP XXXXXXXX T/XXXNNN YYWW 8-Lead SOIC XXXXXXXT XXXXYYWW NNN 8-Lead TSSOP XXXX TYWW NNN 8-Lead 2x3 DFN XXX YWW NN © 2005 Microchip Technology Inc. ...

Page 14

... Part Number TSSOP MSOP 93AA66A A66A 3A66AT 93AA66B A66B 3A66BT 93AA66C A66C 3A66CT 93LC66A L66A 3L66AT 93LC66B L66B 3L66BT 93LC66C L66C 3L66CT 93C66A C66A 3C66AT 93C66B C66B 3C66BT 93C66C C66C 3C66CT Note Temperature grade ( Alphanumeric traceability code Legend: XX ...

Page 15

... Plastic Micro Small Outline Package (MS) (MSOP (F) Dimension Limits Number of Pins Pitch Overall Height Molded Package Thickness Standoff Overall Width Molded Package Width Overall Length Foot Length Footprint (Reference) Foot Angle Lead Thickness Lead Width ...

Page 16

... Plastic Small Outline Transistor (OT) (SOT-23 Dimension Limits Number of Pins Pitch Outside lead pitch (basic) Overall Height Molded Package Thickness Standoff Overall Width Molded Package Width Overall Length Foot Length Foot Angle Lead Thickness Lead Width ...

Page 17

... Plastic Dual In-line (P) – 300 mil (PDIP Dimension Limits Number of Pins Pitch Top to Seating Plane Molded Package Thickness Base to Seating Plane Shoulder to Shoulder Width Molded Package Width Overall Length Tip to Seating Plane Lead Thickness Upper Lead Width ...

Page 18

... Plastic Small Outline (SN) – Narrow, 150 mil (SOIC Dimension Limits Number of Pins Pitch Overall Height Molded Package Thickness Standoff § Overall Width Molded Package Width Overall Length Chamfer Distance Foot Length Foot Angle Lead Thickness ...

Page 19

... Plastic Thin Shrink Small Outline (ST) – 4.4 mm (TSSOP Dimension Limits Number of Pins Pitch Overall Height Molded Package Thickness Standoff § Overall Width Molded Package Width Molded Package Length Foot Length Foot Angle Lead Thickness Lead Width ...

Page 20

... Plastic Dual Flat No Lead Package (MC) 2x3x0.9 mm Body (DFN) – Saw Singulated D PIN 1 ID INDEX AREA (NOTE 2) TOP VIEW A3 Dimension Limits Number of Pins Pitch Overall Height Standoff Contact Thickness Overall Length Exposed Pad Length Overall Width Exposed Pad Width ...

Page 21

... APPENDIX A: REVISION HISTORY Revision B Corrections to Section 1.0, Electrical Characteristics. Section 4.1, 6-Lead SOT-23 package to OT. Revision C Added DFN package. © 2005 Microchip Technology Inc. DS21795C-page 21 ...

Page 22

... NOTES: DS21795C-page 22 © 2005 Microchip Technology Inc. ...

Page 23

... THE MICROCHIP WEB SITE Microchip provides online support via our WWW site at www.microchip.com. This web site is used as a means to make files and information easily available to customers. Accessible by using your favorite Internet browser, the web site contains information: • Product Support – Data sheets and errata, application notes and sample programs, design resources, user’ ...

Page 24

... Telephone: (_______) _________ - _________ Application (optional): Would you like a reply? Y Device: 93AA66A/B/C, 93LC66A/B/C, 93C66A/B/C Questions: 1. What are the best features of this document? 2. How does this document meet your hardware and software development needs you find the organization of this document easy to follow? If not, why? 4 ...

Page 25

... Tape & Reel Temperature Pinout Range Device: 93AA66A: 4K 1.8V Microwire Serial EEPROM 93AA66B: 4K 1.8V Microwire Serial EEPROM 93AA66C: 4K 1.8V Microwire Serial EEPROM w/ORG 93LC66A: 4K 2.5V Microwire Serial EEPROM 93LC66B: 4K 2.5V Microwire Serial EEPROM 93LC66C: 4K 2.5V Microwire Serial EEPROM w/ORG 93C66A: 4K 5.0V Microwire Serial EEPROM 93C66B: 4K 5.0V Microwire Serial EEPROM 93C66C ...

Page 26

... NOTES: DS21795C-page 26 © 2003 Microchip Technology Inc. ...

Page 27

... Use of Microchip’s products as critical components in life support systems is not authorized except with express written approval by Microchip. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights. © 2005 Microchip Technology Inc. Trademarks The Microchip name and logo, the Microchip logo, Accuron, dsPIC ...

Page 28

... Tel: 886-7-536-4818 Fax: 886-7-536-4803 Taiwan - Taipei Tel: 886-2-2500-6610 Fax: 886-2-2508-0102 Taiwan - Hsinchu Tel: 886-3-572-9526 Fax: 886-3-572-6459 © 2005 Microchip Technology Inc. EUROPE Austria - Weis Tel: 43-7242-2244-399 Fax: 43-7242-2244-393 Denmark - Ballerup Tel: 45-4450-2828 Fax: 45-4485-2829 France - Massy ...

Related keywords