MC-7847-AZ NEC, MC-7847-AZ Datasheet - Page 4
![no-image](/images/manufacturer_photos/0/4/470/nec_sml.jpg)
MC-7847-AZ
Manufacturer Part Number
MC-7847-AZ
Description
IC AMPLIFIER DBL 870MHZ H02
Manufacturer
NEC
Datasheet
1.MC-7847-AZ.pdf
(7 pages)
Specifications of MC-7847-AZ
Applications
CATV
Number Of Circuits
1
Current - Supply
375mA
Voltage - Supply, Single/dual (±)
23.5 V ~ 24.5 V
Mounting Type
Surface Mount
Package / Case
Module
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
NOTE ON CORRECT USE
RECOMMENDED SOLDERING CONDITIONS
than the recommended conditions are to be consulted with our sales representatives.
4
Pin Part Heating
Note The point of pin part heating must be kept more than 1.2 mm distance from the root of lead.
(1)
(2)
(3)
This product should be soldered in the following recommended conditions. Other soldering methods and conditions
Soldering Method
The space between PC board and root of the lead should be kept more than 1 mm to prevent undesired
stress to the lead and also should be kept less than 4 mm to prevent undesired parasitic inductance.
Recommended that space is 2.0 to 3.0 mm typical.
Recommended torque strength of the screw is 59 to 78 Ncm.
Form the ground pattern as wide as possible to minimize ground impedance.
(to prevent undesired oscillation)
All the ground pins must be connected together with wide ground pattern to decrease impedance difference.
Pin area temperature : less than 350°C
Hour : Within 3 sec./pin
Data Sheet PG10140EJ02V0DS
Soldering Conditions
Note
Condition Symbol
−
MC-7847