AT32UC3A0512 Atmel Corporation, AT32UC3A0512 Datasheet - Page 4

• Manufacturer Part Number: AT32UC3A0512
• Manufacturer: Atmel Corporation

Specifications of AT32UC3A0512

• Flash (kbytes): 512 Kbytes
• Pin Count: 144
• Max. Operating Frequency: 66 MHz
• Cpu: 32-bit AVR
• # Of Touch Channels: 32
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 109
• Ext Interrupts: 109
• Usb Transceiver: 1
• Usb Speed: Full Speed
• Usb Interface: Device + OTG
• Spi: 6
• Twi (i2c): 1
• Uart: 4
• Ssc: 1
• Ethernet: 1
• Graphic Lcd: No
• Video Decoder: No
• Camera Interface: No
• Adc Channels: 8
• Adc Resolution (bits): 10
• Adc Speed (ksps): 384
• Resistive Touch Screen: No
• Dac Channels: 2
• Dac Resolution (bits): 16
• Temp. Sensor: No
• Crypto Engine: No
• Sram (kbytes): 64
• Self Program Memory: YES
• External Bus Interface: 1
• Dram Memory: sdram
• Nand Interface: No
• Picopower: No
• Temp. Range (deg C): -40 to 85
• I/o Supply Class: 3.0-3.6 or (1.65-1.95+3.0-3.6)
• Operating Voltage (vcc): 3.0-3.6 or (1.65-1.95+3.0-3.6)
• Fpu: No
• Mpu / Mmu: Yes / No
• Timers: 10
• Output Compare Channels: 16
• Input Capture Channels: 6
• Pwm Channels: 13
• 32khz Rtc: Yes
• Calibrated Rc Oscillator: Yes

4. Abbreviations
5. Bootloader Environment
4
Flash and ISP specification
•
•
•
•
•
•
The bootloader manages the USB communication protocol and performs read/write operations
from/to the on-chip memories.
The bootloader is located at the beginning of the on-chip flash array where an area of up to 64
kB can be configured to be write-protected by the internal flash controller. The bootloader pro-
tected size must be at least the size of the bootloader. On AVR UC3, it is configured to 8 kB.
Figure 5-1. Physical Environment
BatchISP is the PC tool that allows to program a part using the AVR UC3 USB DFU bootloader.
It is compatible with Windows and Linux. It is integrated into AVR32Studio thanks to a plugin.
Note that all GCC make files of the UC3 software framework have programming goals using
BatchISP.
ISP: In-System Programming
BOD: Brown-Out Detector
USB: Universal Serial Bus
DFU: Device Firmware Upgrade
avr32program: AVR UC3 Part Programmer for JTAGICE mkII
FLIP: Flexible In-System Programmer
7745C–AVR32–05/09