ATtiny461 Atmel Corporation, ATtiny461 Datasheet - Page 86

• Manufacturer Part Number: ATtiny461
• Manufacturer: Atmel Corporation

Specifications of ATtiny461

• Flash (kbytes): 4 Kbytes
• Pin Count: 20
• Max. Operating Frequency: 20 MHz
• Cpu: 8-bit AVR
• # Of Touch Channels: 8
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 16
• Ext Interrupts: 16
• Usb Speed: No
• Usb Interface: No
• Spi: 1
• Twi (i2c): 1
• Graphic Lcd: No
• Video Decoder: No
• Camera Interface: No
• Adc Channels: 11
• Adc Resolution (bits): 10
• Adc Speed (ksps): 15
• Analog Comparators: 1
• Resistive Touch Screen: No
• Temp. Sensor: Yes
• Crypto Engine: No
• Sram (kbytes): 0.25
• Eeprom (bytes): 256
• Self Program Memory: YES
• Dram Memory: No
• Nand Interface: No
• Picopower: No
• Temp. Range (deg C): -40 to 85
• I/o Supply Class: 1.8 to 5.5
• Operating Voltage (vcc): 1.8 to 5.5
• Fpu: No
• Mpu / Mmu: no / no
• Timers: 2
• Output Compare Channels: 6
• Input Capture Channels: 1
• Pwm Channels: 6
• 32khz Rtc: No
• Calibrated Rc Oscillator: Yes

11.10.4
11.10.5
11.10.6
11.10.7
86
ATtiny261/461/861
TCNT0H – Timer/Counter0 Register High Byte
OCR0A – Timer/Counter0 Output Compare Register A
OCR0B – Timer/Counter0 Output Compare Register B
TIMSK – Timer/Counter0 Interrupt Mask Register
When 16-bit mode is selected (the TCW0 bit is set to one) the Timer/Counter Register TCNT0H
combined to the Timer/Counter Register TCNT0L gives direct access, both for read and write
operations, to the Timer/Counter unit 16-bit counter. To ensure that both the high and low bytes
are read and written simultaneously when the CPU accesses these registers, the access is per-
formed using an 8-bit temporary high byte register (TEMP). This temporary register is shared by
all the other 16-bit registers. See
The Output Compare Register A contains an 8-bit value that is continuously compared with the
counter value (TCNT0L). A match can be used to generate an Output Compare interrupt.
In 16-bit mode the OCR0A register contains the low byte of the 16-bit Output Compare Register.
To ensure that both the high and the low bytes are written simultaneously when the CPU writes
to these registers, the access is performed using an 8-bit temporary high byte register (TEMP).
This temporary register is shared by all the other 16-bit registers. See
16-bit Mode” on page
The Output Compare Register B contains an 8-bit value that is continuously compared with the
counter value (TCNT0L in 8-bit mode and TCNTH in 16-bit mode). A match can be used to gen-
erate an Output Compare interrupt.
In 16-bit mode the OCR0B register contains the high byte of the 16-bit Output Compare Regis-
ter. To ensure that both the high and the low bytes are written simultaneously when the CPU
writes to these registers, the access is performed using an 8-bit temporary high byte register
(TEMP). This temporary register is shared by all the other 16-bit registers. See
isters in 16-bit Mode” on page
• Bit 4 – OCIE0A: Timer/Counter0 Output Compare Match A Interrupt Enable
When the OCIE0A bit is written to one, and the I-bit in the Status Register is set, the
Timer/Counter0 Compare Match A interrupt is enabled. The corresponding interrupt is executed
Bit
0x14 (0x34)
Read/Write
Initial Value
Bit
0x13 (0x33)
Read/Write
Initial Value
Bit
0x12 (0x32)
Read/Write
Initial Value
Bit
0x39 (0x59)
Read/Write
Initial Value
OCIE1D
R/W
R/W
R/W
R/W
7
0
7
0
7
0
7
0
80.
OCIE1A
R/W
R/W
R/W
R/W
6
0
6
0
6
0
6
0
80.
OCIE1B
“Accessing Registers in 16-bit Mode” on page 80
R/W
R/W
R/W
R/W
5
0
5
0
5
0
5
0
OCIE0A
R/W
R/W
R/W
R/W
4
0
4
0
4
0
4
0
TCNT0H[7:0]
OCR0A[7:0]
OCR0B[7:0]
OCIE0B
R/W
R/W
R/W
R/W
3
0
3
0
3
0
3
0
TOIE1
R/W
R/W
R/W
R/W
2
0
2
0
2
0
2
0
TOIE0
R/W
R/W
R/W
R/W
“Accessing Registers in
1
0
1
0
1
0
1
0
TICIE0
“Accessing Reg-
R/W
R/W
R/W
R
0
0
0
0
0
0
0
0
2588E–AVR–08/10
TCNT0H
OCR0A
OCR0B
TIMSK