SAM3N2B Atmel Corporation, SAM3N2B Datasheet - Page 333

• Manufacturer Part Number: SAM3N2B
• Manufacturer: Atmel Corporation

Specifications of SAM3N2B

• Flash (kbytes): 128 Kbytes
• Pin Count: 64
• Max. Operating Frequency: 48 MHz
• Cpu: Cortex-M3
• # Of Touch Channels: 23
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 47
• Ext Interrupts: 47
• Quadrature Decoder Channels: 2
• Usb Speed: No
• Usb Interface: No
• Spi: 3
• Twi (i2c): 2
• Uart: 4
• Ssc: 1
• Graphic Lcd: No
• Video Decoder: No
• Camera Interface: No
• Adc Channels: 10
• Adc Resolution (bits): 10
• Adc Speed (ksps): 384
• Resistive Touch Screen: No
• Dac Channels: 1
• Dac Resolution (bits): 10
• Temp. Sensor: No
• Crypto Engine: No
• Sram (kbytes): 16
• Self Program Memory: YES
• Dram Memory: No
• Nand Interface: No
• Picopower: No
• Temp. Range (deg C): -40 to 85
• I/o Supply Class: 1.8/3.3
• Operating Voltage (vcc): 1.62 to 3.6
• Fpu: No
• Mpu / Mmu: no / no
• Timers: 6
• Output Compare Channels: 6
• Input Capture Channels: 3
• Pwm Channels: 4
• 32khz Rtc: Yes
• Calibrated Rc Oscillator: Yes

23. Clock Generator
23.1
23.2
11011A–ATARM–04-Oct-10
Description
Embedded Characteristics
The Clock Generator User Interface is embedded within the Power Management Controller and
is described in
the Clock Generator registers are named CKGR_.
The Clock Generator is made up of:
It provides the following clocks:
• A Low Power 32,768 Hz Slow Clock Oscillator with bypass mode
• A Low Power RC Oscillator
• A 3 to 20 MHz Crystal or Ceramic Resonator-based Oscillator which can be bypassed
• A factory programmed Fast RC Oscillator, 3 output frequencies can be selected: 4, 8 or
• A 60 to 130 MHz programmable PLL (input from 3.5 to 20 MHz), capable of providing the
• SLCK, the Slow Clock, which is the only permanent clock within the system
• MAINCK is the output of the Main Clock Oscillator selection: either the Crystal or Ceramic
• PLLCK is the output of the Divider and 60 to 130 MHz programmable PLL
12 MHz. By default 4 MHz is selected.
clock MCK to the processor and to the peripherals.
Resonator-based Oscillator or 4/8/12 MHz Fast RC Oscillator
Section 24.15 ”Power Management Controller (PMC) User
Interface”. However,
SAM3N
333