CS8416-CZZ Cirrus Logic Inc, CS8416-CZZ Datasheet - Page 38

• Manufacturer Part Number: CS8416-CZZ
• Description: IC RCVR DGTL 192KHZ 28TSSOP COMM
• Manufacturer: Cirrus Logic Inc
• Type: Digital Audio Interface Receiverr

Specifications of CS8416-CZZ

• Package / Case: 28-TSSOP
• Applications: Automotive Audio
• Mounting Type: Surface Mount
• Operating Supply Voltage: 3.3 V / 5.0 V
• Operating Temperature Range: - 10 C to + 70 C
• Mounting Style: SMD/SMT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 598-1017 - BOARD EVAL FOR CS8416 RCVR
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 598-1124-5

38
14.4
DETCI
7
RMCKF – Recovered Master Clock Frequency
Default = ‘0’
0 – RMCK output frequency is 256*F
1 – RMCK output frequency is 128*F
CHS – Sets which channel's C data is decoded in the Receiver Channel Status register (0Ah).
Default = ‘0’
0 – A channel.
1 – B channel.
If CHS = 0 and TRUNC = 1, both channels' audio data will be truncated by the AUX[3:0] bits indicated in the
channel A Channel Status data. If CHS = 1 and TRUNC = 1, both channels' audio data will be truncated by
the AUX[3:0] bits indicated in the channel B Channel Status data. This will occur even if the AUX[3:0] bits
indicated in the channel A Channel Status data are not equal to the AUX[3:0] bits indicated in the channel
B Channel Status data.
Control2 (02h)
DETCI – D to E status transfer inhibit
Default = ‘0’
0 – Allow update.
1 – Inhibit update.
EMPH_CNTL[2:0] – De-emphasis filter control. See
Default = ‘000’
000 – If the serial audio output port is using the AES3 direct-output format, the de-emphasis filter must re-
main off.
001 – 32 kHz setting.
010 – 44.1 kHz setting.
011 – 48 kHz setting.
100 – 50 μ s/15 μ s de-emphasis filter auto-select on. Coefficients (32, 44.1 or 48 kHz or no de-emphasis fil-
ter at all) match the pre-emphasis and sample frequency indicators in the channel status bits of Channel A.
Thus it is impossible to have de-emphasis applied to one channel but not the other. The de-emphasis filter
is turned off if the audio data is detected to be non-audio data.
GPO0SEL[3:0] – GPO0 Source select. See
Default = ‘0000’
EMPH_CNTL2 EMPH_CNTL1 EMPH_CNTL0
6
5
S
S
.
.
4
“General Purpose Outputs” on page
GPO0SEL3
Figure 14
3
for De-emphasis filter response.
GPO0SEL2
2
GPO0SEL1
29.
1
GPO0SEL0
CS8416
DS578F3
0