2-1658015-3 TE Connectivity, 2-1658015-3 Datasheet - Page 3

• Manufacturer Part Number: 2-1658015-3
• Manufacturer: TE Connectivity

Specifications of 2-1658015-3

• Product Type: Connector
• Product Line: MICTOR SB
• Impedance (?): 50
• Solder Tail Contact Plating: Gold over Nickel
• Number Of Positions: 120
• Centerline (mm [in]): 0.80 [0.031]
• Polyamide Film Pad: With
• Contact Loading Pattern: Fully Loaded
• Contact Plating, Mating Area, Material: Select Gold
• Contact Material (signal): Phosphor Bronze
• Contact Material (ground): Phosphor Bronze
• Connector Style: Plug
• Housing Color: Black
• Housing Material: Liquid Crystal Polymer (LCP)
• Stack Height (mm [in]): 11.00 [0.433]
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Reflow solder capable to 245°C, Reflow solder capable to 260°C
• Rohs/elv Compliance History: Always was RoHS compliant
• Temperature Range (°c): -65 – +125
• Packaging Method: Tray

Durability.
Mating force.
Unmating force.
Thermal shock.
Humidity-temperature cycling.
Temperature life.
Rev B
NOTE
Test Description
Shall meet visual requirements, show no physical damage, and meet requirements of additional
tests as specified in the Product Qualification and Requalification Test Sequence shown in
Figure 2. The use of alternate gold plating thickness parts (gold flash or 30 microinch gold) can
be expected to have the same electrical, mechanical and dielectric performance characteristics.
Decision to use such parts should depend on customer’s need for alternate durability or
environmental performance characteristics.
See Note.
22.2 N [80 ozf] maximum per
module.
5.6 N [20 ozf] minimum per
module.
See Note.
See Note.
See Note.
ENVIRONMENTAL
Requirement
EIA-364-9.
Manually mate and unmate 10 :in
gold plated specimens for 100
cycles at a maximum rate of 500
cycles per hour.
EIA-364-13.
Measure force necessary to mate
specimens at a maximum rate of
12.7 mm [.5 in] per minute.
EIA-364-13.
Measure force necessary to mate
specimens at a maximum rate of
12.7 mm [.5 in] per minute.
EIA-364-32, Test Condition III.
Subject specimens to 5 cycles
between -65 and 125 ° C.
EIA-364-31, Method III.
Subject specimens to 10 cycles (10
days) between 25 and 65°C at 80
to 100% RH.
EIA-364-17, Method A, Test
Condition 4.
Subject specimens to 105 °for
300 hours.
Procedure
108-2139
3 of 5