3-1658012-5 TE Connectivity, 3-1658012-5 Datasheet - Page 2
![](/photos/41/41/414164/pr1658012-5_sml.jpg)
3-1658012-5
Manufacturer Part Number
3-1658012-5
Description
Manufacturer
TE Connectivity
Specifications of 3-1658012-5
Product Type
Connector
Product Line
MICTOR SB
Impedance (?)
50
Solder Tail Contact Plating
Gold over Nickel
Number Of Positions
140
Centerline (mm [in])
0.80 [0.031]
Polyamide Film Pad
With
Contact Loading Pattern
Differential Load
Contact Plating, Mating Area, Material
Select Gold
Contact Material (signal)
Phosphor Bronze
Contact Material (ground)
Phosphor Bronze
Connector Style
Receptacle
Housing Color
Black
Housing Material
Liquid Crystal Polymer (LCP)
Stack Height (mm [in])
5.00 [0.197], 8.00 [0.315], 11.00 [0.433], 16.00 [0.630], 19.00 [0.748], 22.00 [0.866], 25.00 [0.984], 30.00 [1.181]
Rohs/elv Compliance
RoHS compliant, ELV compliant
Lead Free Solder Processes
Reflow solder capable to 245°C, Reflow solder capable to 260°C
Rohs/elv Compliance History
Always was RoHS compliant
Temperature Range (°c)
-65 – +125
Packaging Method
Tray
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
3-1658012-5
Manufacturer:
TE Connectivity AMP Connectors
Quantity:
12 000
Company:
Part Number:
3-1658012-5
Manufacturer:
TYCO
Quantity:
36 260
3.3.
3.4.
3.5.
Initial examination of product.
Final examination of product.
Low level contact resistance.
Insulation resistance.
Withstanding voltage.
Solderability.
Vibration, radom.
Mechanical shock.
Rev B
Ratings
●
●
●
●
Performance and Test Description
Product is designed to meet the electrical, mechanical and environmental performance requirements
specified in Figure 1. Unless otherwise specified, all tests shall be performed at ambient environmental
conditions per EIA-364.
Test Requirements and Procedures Summary
Test Description
Voltage: 125 volts AC
Current:
•
•
Temperature:
Characteristic Impedance:50 ohms
Signal contacts: 1.25 amperes
Ground contacts:9.5 amperes
-65 to 125 / C
Meets requirements of product
drawing
Meets visual requirements.
Î
signal contacts.
Î
ground contacts.
5000 megohms minimum initial.
1000 megohms minimum after
exposures.
1 minute hold with no breakdown
or flashover. 0.5 milliampere
maximum leakage current.
Solderable area shall have a
minimum of 95% solder coverage.
No discontinuities of 1
microsecond
or longer duration.
See Note.
No discontinuities of 1
microsecond
or longer duration.
See Note.
R 15 milliohms maximum for
R 5 milliohms maximum for
Figure 1 (continued)
MECHANICAL
ELECTRICAL
Requirement
EIA-364-18.
Visual and dimensional (C of C)
inspection per product drawing.
EIA-364-18.
Visual inspection.
EIA-364-23.
Subject specimens to 100
milliamperes maximum and 20
millivolts maximum open circuit
voltage.
See Figure 3.
EIA-364-21.
Test between adjacent signal
contacts, and between all signal
contacts and ground of mated
specimens.
EIA-364-20, Condition I.
675 volts AC at sea level. Test
between adjacent signal contacts,
and between all signal contacts
and ground of mated specimens.
EIA-638.
Subject contacts to solderability.
EIA-364-28, Test Condition V.
Subject specimens to 7.56 G's rms
between 50 to 2000 Hz. One hour
in each of 3 mutually perpendicular
planes.
EIA-364-27, Method A.
Subject specimens to 50 G's half-
sine shock pulses of 11
milliseconds duration. Three
shocks in each direction applied
along 3 mutually perpendicular
planes, 18 total shocks.
Procedure
108-2139
2 of 5