1934932-1 TE Connectivity, 1934932-1 Datasheet - Page 4

• Manufacturer Part Number: 1934932-1
• Manufacturer: TE Connectivity

Specifications of 1934932-1

• Connector Type: Connector Assembly
• Pcb Mounting Orientation: Right Angle
• Pcb Mount Retention: With
• Termination Method To Pc Board: Through Hole - Press Fit
• Pcb Mount Alignment: Without
• Sealed: No
• Ul File Number: E28476
• Stackable: No
• Data Rate (gb/s): 10.000
• Differential Impedance (?): 85
• Contact - Rated Current (a): 0.5
• Hot Pluggable: No
• Operating Voltage Reference: AC
• Operating Voltage (vac): 250
• Tail Length (mm [in]): 2.2 [0.087]
• Number Of Positions: 150
• Number Of Signal Positions: 100
• Number Of Rows: 15
• Number Of Columns: 10
• Pcb Mount Retention Type: Compliant Posts
• Centerline (mm [in]): 1.91 [0.075]
• Row-to-row Spacing (mm [in]): 1.40 [0.055]
• Mating Retention: Without
• Contact Type: Socket
• Contact Design: Dual Beam
• Contact Base Material: Phosphor Bronze
• Contact Plating, Mating Area, Material: Gold
• Contact Plating, Mating Area, Thickness (µm [?in]): 0.76 [29.92]
• Tail Plating Material: Matte Tin
• Tail Plating, Thickness (µm [?in]): 0.5 [20]
• Connector Style: Receptacle
• Housing Color: Black
• Mating Alignment: With
• Mating Alignment Type: Guide Slot
• Housing Material: Liquid Crystal Polymer (LCP)
• Ul Flammability Rating: UL 94V-0
• Number Of Pairs Per Connector: 50
• Pairs Per Column: 5
• Differential Signaling: With
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Agency/standard: UL
• Ul Rating: Recognized
• Ul Voltage Rating (vac): 250
• Operating Temperature (°c [°f]): -65 – +90 [-85 – +194]
• Board-to-board Configuration: Right Angle
• Pcb Thickness, Recommended (mm [in]): 1.57 [0.062]
• Contact Transmits (typical Application): Signal (Data)
• Packaging Method: Tube

Hum idity/tem perature cycling.
Tem perature life.
Mixed flowing gas.
Dust contam ination.
Rev B
NOTE
Test Description
Shall meet visual requirements, show no physical damage, and meet requirements of additional
tests as specified in the Product Qualification and Requalification Test Sequence shown in Figure
2.
See Note.
See Note.
See Note.
See Note.
Figure 1 (end)
Requirem ent
EIA-364-31, Method III.
Subject m ated specim ens to 50
cycles (800 hours) between 5 and
85°C at 80 to 100% RH.
EIA-364-17, Method A, Test Tim e
Condition C.
Subject m ated specim ens to 90°C
for 500 hours.
EIA-364-65, Class IIA (4 gas).
Subject specim ens to
environm ental Class IIA for 20 days
total (10 days unm ated followed by
10 days m ated).
EIA-364-91.
Subject unm ated specim ens to dust
contam ination #1 for 1 hour. Air flow
shall be 360 cfm .
Procedure
108-2303
4 of 8