CS6422-CS Cirrus Logic Inc, CS6422-CS Datasheet - Page 31

• Manufacturer Part Number: CS6422-CS
• Description: IC CODEC SPKRPHONE 2CH 20-SOIC
• Manufacturer: Cirrus Logic Inc
• Type: Audio Processorr

Specifications of CS6422-CS

• Mounting Type: Surface Mount
• Package / Case: 20-SOIC
• Applications: Speakerphones
• Peak Reflow Compatible (260 C): No
• Termination Type: SMD
• Supply Voltage Max: 5.5V
• Leaded Process Compatible: No
• Supply Voltage Min: 4.5V
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 598-1199-5

Figure 8 shows the suggested placement of decou-
pling capacitors for the power supplies. Note that
the trace length from the power pin to the capaci-
tors is minimized. Also note that the smaller valued
capacitor is placed closer to the pin than the larger
valued capacitor. The smaller capacitor decouples
high frequency noise and the larger capacitor atten-
uates lower frequencies.
The separation of analog and digital power and
ground is done in two ways. The power is separated
by deriving the digital power for the CS6422 from
the analog through a ferrite bead to isolate analog
DS295F1
10 µ F
(Analog)
+5V
0.1 µF
Figure 9. Ground Planes
AVDD
AGND
Microcontroller
Ferrite Bead
CS6422
from digital, as shown in Figure 9. The ferrite bead
serves as a low-pass filter to remove CS6422 digi-
tal switching noise from the analog power supply.
The ground is separated by isolating all the digital
components of the system board on one ground
plane and all the analog and linear components on
a different ground plane. The CS6422 should be
placed over the analog ground plane. This prevents
digital switching noise from the digital components
of the board from coupling into the converters and
aliasing into the passband.
DVDD
DGND
Analog Ground Plane
Digital Ground Plane
0.1 µF 10 µ F
CS6422
CS6422
31
31