2-1376388-3 TE Connectivity, 2-1376388-3 Datasheet - Page 12

• Manufacturer Part Number: 2-1376388-3
• Manufacturer: TE Connectivity

Specifications of 2-1376388-3

• Product Line: 5.0 Power Key Connectors
• Product Type: Connector
• Connector Type: Housing
• Wire/cable Type: Discrete Wire
• Termination Method To Wire/cable: Crimp
• Sealed: No
• Shape: Rectangular
• Ul File Number: E28476
• Csa File Number: LR7189
• Mating Retention Type: Latching
• Contact - Rated Current (a): 10
• Hot Pluggable: No
• Operating Voltage Reference: AC
• Operating Voltage (vac): 300
• Wire/cable Size (awg): 16 – 24
• Wire/cable Size (mm²): 0.22 – 1.25
• Wire/cable Size (cma): 434.18 – 2,466.91
• Profile Height (y-axis) (mm [in]): 9.60 [0.378]
• Number Of Positions: 2
• Number Of Rows: 1
• Mating Retention: With
• Selectively Loaded: No
• Centerline (mm [in]): 5.00 [0.197]
• Length (x-axis) (mm [in]): 15.00 [0.591]
• Width (z-axis) (mm [in]): 16.20 [0.638]
• Contact Type: Socket
• Connector Style: Plug
• Housing Color: Blue
• Mating Alignment: With
• Mating Alignment Type: Keyed
• Housing Material: Nylon 6/6 GF
• Ul Flammability Rating: UL 94V-0
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Agency/standard: UL, CSA
• Ul Rating: Recognized
• Ul Voltage Rating (vac): 300
• Operating Temperature (°c [°f]): -30 – +105 [-22 – +221]
• Applies To: Wire/Cable
• Accepts Wire Insulation Diameter, Range (mm [in]): 1.70 – 3.10 [0.067 – 0.122]
• Application Use: Wire-to-Board
• Contact Transmits (typical Application): Signal (Data)/ Power
• Packaging Method: Bag

*
12 of 19
Requirements
Requirements
Requirements
Procedures
Procedures
Procedures
Test Items
Test Items
Test Items
試験項目
試験方法
試験項目
試験方法
試験項目
試験方法
規格値
規格値
規格値
製品外観 : 製品は錆、腐食、変形、割れ、カケ、
項番
項番
項番
No.
No.
No.
変色等の異常なきこと。
耐アンモニア性
20 m
性能に影響する様な腐食なきこと｡
嵌合したコネクタを 3% アンモニア水溶液
25 ml/l の割合でデシケータに入れこの雰
囲気中に 7 時間暴露する｡
はんだ付け性
90% 以上ぬれていること｡
はんだ温度
はんだ浸漬時間 : 3±0.5 秒
MIL-STD-202, 試験法 208
はんだ耐熱性
試験後物理的損傷を生じないこと｡
プリント基板に取り付けて試験する｡
はんだ温度
はんだ浸漬時間
MIL-STD-202, 条件 210
EIA 364-56
但し手はんだの場合350±10℃, 3±0.5秒に
て試験する｡但しタイン部にコテ先等による
力が加わらない様にする｡
以下 (終期)
: 230±5℃
260±5℃
10±0.5 秒
5mm パワー キイ コネクタ
5mm Power Key Connector
Fig. 3
(終り)
3.5.22
3.5.23
3.5.24
* Product
transformation, crack and discoloration.
NH
20 m Max. (Final)
No corrosion influence performance
Mated conn. is put into atmosphere that rated
25 ml/l of 3% NH
Solderability
Wet Solder Coverage :
90 % Min.
Solder Temperature : 230 ± 5℃
Immersion Duration : 3 ± 0.5 seconds
MIL-STD-202 Method 208
Resistance to Soldering Heat
No physical damage shall occur.
Test connector on PCB.
Solder Temperature : 260±5℃
Immersion Duration : 10±0.5 sec.
MIL-STD-202 Condition B
EIA 364-56
Incase of manual soldering iron, apply it as
360±10℃ for 3±5℃ seconds without forcing
pressure to affect the tine of contact.
(End)
3
Gas
must
3
for 7hr.
be
without
rust,
108-5699
Rev. E
corrosion