4-1123724-2 TE Connectivity, 4-1123724-2 Datasheet - Page 3

• Manufacturer Part Number: 4-1123724-2
• Manufacturer: TE Connectivity

Specifications of 4-1123724-2

• Product Line: Economy Power
• Product Type: Connector
• Connector Type: Header
• Pcb Mounting Orientation: Vertical
• Pcb Mount Retention: Without
• Pcb Mount Alignment: Without
• Termination Method To Pc Board: Through Hole - Solder
• Sealed: No
• Mating Retention Type: Latching
• Contact - Rated Current (a): 7.5
• Operating Voltage Reference: AC
• Operating Voltage (vac): 250
• Tail Orientation: In-line
• Tail Length (mm [in]): 3.7 [0.146]
• Profile Height (y-axis) (mm [in]): 8.50 [0.3346]
• Centerline (mm [in]): 7.92 [0.312]
• Header Type: Unshrouded
• Number Of Positions: 3
• Selectively Loaded: No
• Mating Retention: With
• Number Of Rows: 1
• Length (x-axis) (mm [in]): 11.82 [0.4653]
• Width (z-axis) (mm [in]): 10.70 [0.421]
• Contact Type: Pin
• Contact Base Material: Brass
• Contact Plating, Mating Area, Material: Tin
• Contact Plating, Mating Area, Thickness (µm [?in]): 0.8 [31.5]
• Contact Design: Square Post
• Tail Plating Material: Tin
• Tail Plating, Thickness (µm [?in]): 0.8 [31.46]
• Connector Style: Plug
• Housing Material: PBT
• Housing Color: Red
• Mating Alignment: With
• Ul Flammability Rating: UL 94V-0
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Wave solder capable to 240°C, Wave solder capable to 260°C, Wave solder capable to 265°C
• Rohs/elv Compliance History: Converted to comply with RoHS directive
• Operating Temperature (°c [°f]): -25 – +105 [-13 – +221]
• Applies To: Printed Circuit Board
• Pcb Thickness, Recommended (mm [in]): 1.60 [0.063]
• Contact Transmits (typical Application): Power

Mechanical shock.
Durability.
Mating force.
Unmating force.
Crimp tensile.
Contact retention.
Thermal shock.
Humidity/temperature cycling.
Temperature life.
Rev O5
NOTE
Test Description
Shall meet visual requirements, show no physical damage, and meet requirements of additional
tests as specified in the Product Qualification and Requalification Test Sequence shown in Figure
2.
No discontinuities of 1 microsecond
or longer duration.
See Note.
See Note.
9.8 N [2.2 lbf] maximum per
contact.
0.9 N [0.22 lbf] minimum per
contact.
29.4 N [6.6 lbf] minimum per
contact.
See Note.
See Note.
See Note.
Wire Size
(AWG)
22
20
18
16
ENVIRONMENTAL
Figure 1 (end)
Requirement
N [lbf] Minimum
Crimp Tensile
44.5 [10]
62.3 [14]
75.6 [17]
120 [27]
EIA-364-27, Condition H.
Subject mated specimens to 30 G's
half-sine shock pulses of 11
milliseconds duration. Three shocks
in each direction applied along 3
mutually perpendicular planes, 18
total shocks.
EIA-364-9.
Mate and unmate specimens for 15
cycles at a maximum rate of 500
cycles per hour.
EIA-364-13.
Measure force necessary to mate
specimens with latches disengaged
at a maximum rate of 12.7 mm per
minute.
EIA-364-13.
Measure force necessary to unmate
specimens with latches disengaged
at a maximum rate of 12.7 mm per
minute.
EIA-364-8.
Determine crimp tensile at a rate of
25.4 mm per minute.
EIA-364-29.
Apply axial load at a rate of 4.4 N
per second and hold for 6 seconds.
EIA-364-32, Test Condition VII.
Subject specimens to 10 cycles
between -55 and 105° C with 30
minute dwells at temperature
extremes.
EIA-364-31, Method III.
Subject specimens to 10 cycles (10
days) between 25 and 65° C at 80 to
100% RH.
EIA-364-17, Method A, Test
Condition 4, Test Time Condition C.
Subject mated specimens to 105° C
for 500 hours.
Procedure
108-2297
3 of 6