927853-6 TE Connectivity, 927853-6 Datasheet - Page 2

• Manufacturer Part Number: 927853-6
• Manufacturer: TE Connectivity

Specifications of 927853-6

• Product Type: Contact
• Mating Area Interface Dimensions (mm [in]): 6.35 x 0.81 [.250 x .032]
• Receptacle Style: Straight
• Insulation Diameter (mm [in]): 1.40-2.30 [.055-.090]
• Finish: Pre-Tin
• Keyed: No
• Wire Range (mm [awg]): 0.50-1.00² [20-17]
• Position Keyed: None
• Stock Thickness (mm [in]): 0.41 [0.016]
• Contact Type: Socket
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Applies To: Wire/Cable
• Packaging Method: Loose Piece

2002
Product Features
Products for Industrial &
Commercial Applications
Direct Mating Connectors
for PC Boards, 2–8
Positions, up to 6 A Current
Carrying Capacity
Indirect Mating Connectors,
1–8 Positions, up to 16 A
Current Carrying Capacity
Variable Keying
Double Wire Termination
possible
Dimensions are shown for
reference purposes only.
Conversion Rate:
25.4mm = 1 inch
Tyco Electronics’ newly
designed AMP multifitting
Mark II Connector System
was developed according
to the latest connector
design standards.
The requirements of
advanced In-Line mating
technology for the
components and contacts of
pc boards are incorporated
in the direct and indirect
versions of these connector
systems.
AMP multifitting Mark II
Connectors in In-Line Mating Technology
Introduction
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
This system is suitable for a
wide wire size range.
Current carrying capacity is
16 A maximum.
Double termination is
possible with 0.5 and 0.5
mm
conductors.
The connectors are avail-
able in 1- to 8-positions
(indirect) resp. 2- to 8-
positions (direct) with an
exterior locking device.
2
or 0.5 and 0.75 mm
Specifications subject to
change.
Dimensions are
millimetres over inches
METRIC
2
Interior locking options are
available on request.
Supplied in chain and
provided with all keying and
polarisation ribs, the
connectors can be operated
economically with modern
Application Tooling
Equipment.
www.tycoelectronics.com
Catalogue 1654742
Revised 5-04