63273-1 TE Connectivity, 63273-1 Datasheet - Page 2

• Manufacturer Part Number: 63273-1
• Manufacturer: TE Connectivity
• Series: 187r

Specifications of 63273-1

• Product Type: Terminal
• Terminal Line: Standard MAG-MATE
• Terminal Configuration: Tab
• Tab Hole/dimple: Dimple
• Termination Method To Wire/cable: IDC Standard
• Proprietary Name: FASTON
• Tab Size (mm [in]): 4.75 x 0.51 [.187 x .020]
• Cavity Size: Size 2
• Magnet Wire Range (mm [awg]): 0.91 – 1.15 [17 – 19]
• Terminal Height (mm [in]): 7.62 [0.300]
• Stock Thickness (mm [in]): 0.51 [0.020]
• Stock Thickness, Magnet Wire Side (mm [in]): 0.51 [0.020]
• Plating Material: Tin
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Packaging Method: Strip

3.2.
3.3.
3.4.
Initial exam ination of product.
Final examination of product.
Low Level Contact Resistance
(LLCR).
Current cycling.
Insertion force.
Extraction force.
Rev D
Materials
Materials used in the construction of this product shall be as specified on the applicable product
drawing.
Perform ance and Test Description
Product is designed to m eet the electrical, m echanical and environm ental perform ance requirem ents
specified in Figure 1. Unless otherwise specified, all tests shall be perform ed at am bient environm ental
conditions.
Test Requirem ents and Procedures Sum m ary
Test Description
Meets requirem ents of product
drawing.
Meets visual requirem ents.
See Figure 3.
Term ination resistance at specified
test current.
See Figures 3 and 4.
66.7 N [15 lbf] m axim um for poke-in
connection.
355.9 N [80 lbf] m axim um for
term ination into plastic housing.
22.2 N [5 lbf] m inim um for poke-in
connection.
22.2 N [5 lbf] m inim um for standard
term inal cavity retention.
89 N [20 lbf] m inim um for latch-in
type term inal cavity retention.
Figure 1 (continued)
MECHANICAL
ELECTRICAL
Requirem ent
EIA-364-18.
Visual and dim ensional (C of C)
inspection per product drawing.
EIA-364-18.
Visual inspection.
EIA-364-23.
Subject specim ens to 100
m illiam peres m axim um and 20
m illivolts m axim um open circuit
voltage.
See Figure 4.
EIA-364-55.
Subject specim ens to 480 cycles of
15 m inutes ON and 15 m inutes
OFF. Read initially and after 96,
192, 384 and final cycles.
EIA-364-5.
Measure the force necessary to
insert poke-in connection or
term inate term inal into plastic
housing cavity (polyester 30%
glass-filled) at a m axim um rate of
10 m m [.39 in] per m inute.
EIA-364-5.
Measure the force necessary to pull
poke-in connection out of term inal
or term inal out of cavity (polyester
30% glass-filled) at a m axim um rate
of 10 m m [.39 in] per m inute.
Procedure
108-2012
2 of 6