TSM24064B TEAM SOURCE DISPLAY, TSM24064B Datasheet - Page 11

• Manufacturer Part Number: TSM24064B
• Manufacturer: TEAM SOURCE DISPLAY

Specifications of TSM24064B

• Display Format: 240 x 64
• Control/driver Ic: RA6963
• Outline Dimension(mm): 180 x 62.0 x 14.5MAX.
• V.a.(mm): 132.0 x 39.0
• Supply Voltage: 5.0V
• Interface Mode: Parallel
• Moq: 500

Team Source Display
www.tslcd.com
8. Handling Precautions
8.1 Mounting method
8.2 Cautions of LCD handling and cleaning
8.3 Caution against static charge
8.4 Packaging
8.5 Caution for operation
8.6 Storage
8.7 Safety
-When any liquid leaked out of a damaged glass cell comes in contact with your hands, please wash it off well at once with soap
and water.
The LCD module use C-MOS LSI drivers. So we recommend you:
-Isopropyl alcohol
-Ethyl alcohol
-Trichlorotriflorothane
Do not wipe the display surface with dry or hard materials that will damage the polarizer surface.
Do not use the following solvent:
-Water
-Ketene
-Aromatics
-Module employs LCD elements, and must be treated as such. Avoid intense shock and falls from a height.
-To prevent modules from degradation, do not operate or store them exposed direct to sunshine or high
temperature/humidity.
-It is an indispensable condition to drive LCD module within the limits of the specified voltage since the higher voltage over
the limits may cause the shorter life of LCD module.
-Response time will be extremely delayed at lower temperature than the operating temperature range and on the other
hand at higher temperature LCD module may show dark color in them. However those phenomena do not mean
malfunction or out of order of LCD module, which will come back in the specified operating temperature.
A panel of LCD module made by our company consists of two thin glass plates with polarizers that easily get damaged.
And since the module in so constructed as to be fixed by utilizing fitting holes in the printed circuit board (PCB), extreme
care should be used when handling the LCD modules.
When cleaning the display surface, use soft cloth with solvent (recommended below) and wipe lightly.
Connect any unused input terminal to V
work/assembly areas, assembly equipment to protect against static electricity.
In the case of storing for a long period of time, the following ways are recommended:
-Storage in polyethylene bag with the opening sealed so as not to enter fresh air outside in it. And with not desiccant.
-Placing in a dark place where neither exposure to direct sunlight nor light is. Keeping the storage temperature range.
-Storing with no touch on polarizer surface by any thing else.
-It is recommendable to crash damaged or unnecessary LCD into pieces and to wash off liquid crystal by either of
solvents such as acetone and ethanol, which should be burned up later.
-An electrochemical reaction due to DC (direct current) causes LCD undesirable deterioration so that the uses of DC
(direct current) drive should be avoided.
dd
or V
ss
. Do not input any signals before power is turned on, and ground your body,
Email: [e-mail]
LCM Specification