BTS 5682E Infineon Technologies, BTS 5682E Datasheet - Page 24

• Manufacturer Part Number: BTS 5682E
• Manufacturer: Infineon Technologies

Specifications of BTS 5682E

• Packages: PG-DSO-36
• Channels: 6.0
• Channel Mix: 3x50mohm+2*130mohm+1*230mohm
• Led Mode: Yes
• Cranking Mode: Yes
• Pwm Engine Integrated: No

Figure 12
The ERR-flag will be set during dynamic temperature sensor shut down. It can be reset by reading the ERR-flag.
If the channel is still in dynamic temperature sensor shut down, the ERR-flag will be set again.
7.3
In reverse polarity mode, power dissipation is caused by the intrinsic body diode of each DMOS channel as well
as each ESD diode of the logic pins. The reverse current through the channels has to be limited by the connected
loads. The current through the ground pin, sense pin IS, the logic power supply pin
home input pin has to be limited as well (please refer to the maximum ratings listed on
Note: No protection mechanism like temperature protection or current limitation is active during reverse polarity.
Data Sheet
Dynamic Temperature Sensor Operations
Reverse Polarity Protection
OUTx
I
T
IN
L(LIM)
j(SC)
I
ERR
T
I
IS
L
/
j
∆T
jSW
∆T
24
jSW
CTL = 1
V
DD
∆T
, the SPI pins and the limp
Page
jSW
deltaT.emf
SPOC - BTS5682E
Protection Functions
t
t
t
t
t
Rev. 1.0, 2008-01-22
9).