BTS3800SL Infineon Technologies, BTS3800SL Datasheet - Page 4

• Manufacturer Part Number: BTS3800SL
• Manufacturer: Infineon Technologies

Specifications of BTS3800SL

• Packages: PG-SCT595-5
• Channels: 1.0
• Vds (max): 41.0 V
• Id(nom): 0.35 A
• Rds (on) (max): 800.0 mOhm
• Id(lim) (min): 0.75 A

Protective Functions
•
•
•
•
•
Applications
•
•
•
•
•
Detailed Description
The device is able to switch all kind of resistive, inductive and capacitive loads, limited by
current capabilities.
The BTS3800SL offers ESD protection on the IN Pin refering to the Source Pin (Ground).
The overtemperature protection prevents the device from overheating due to overload and/or bad cooling
conditions. The temperature information is given by a temperature sensor which is placed monolitically in the
power stage.
The BTS3800SL has a thermal latch function. The device will turn off and stay off, even after the measured
temperature has dropped below the thermal hysteresis. After cooling down the device can be switched on again
by toggling the IN pin.
The over voltage protection is active during load dump or inductive turn off conditions.
In this conditions the power stage is limiting the Drain to Source voltage at V
Datasheet
Electrostatic discharge protection (ESD)
Active clamping over voltage protection
Thermal shutdown with latching behavior
Short circuit protection
Current threshold switch off
Designed for driving relays in automotive and industrial applications
Protected power switch for small loads
Protected line driver
Protected supply switch
Replacement of discrete circuits
4
Smart low side power switch
DS(AZ)
and dissipating energy.
HITFET - BTS3800SL
Rev. 1.1, 2011-04-30
E
AS
and maximum
Overview