NSPR510GS Nichia, NSPR510GS Datasheet
NSPR510GS
Specifications of NSPR510GS
Related parts for NSPR510GS
NSPR510GS Summary of contents
Page 1
... NICHIA CORPORATION SPECIFICATIONS FOR RED LED NSPR510GS ● RoHS Compliant ...
Page 2
SPECIFICATIONS (1) Absolute Maximum Ratings Item Forward Current Pulse Forward Current Reverse Voltage Power Dissipation Operating Temperature Storage Temperature Junction Temperature * Absolute Maximum Ratings at T =25° conditions with pulse width ≤10ms and duty cycle ≤10%. ...
Page 3
... Tolerance of measurements of the Forward Voltage is ±0.05V. * Luminous Intensity value as per CIE 127:2007 standard. * Tolerance of measurements of the Luminous Intensity is ±10%. * Tolerance of measurements of the Chromaticity Coordinate is ±0.01 shipment shall consist of LEDs in a combination of the above ranks. The percentage of each rank in the shipment shall be determined by Nichia. Min Max Unit 1.80 2 ...
Page 4
CHROMATICITY DIAGRAM 0.40 0.35 0.30 0.25 0.20 0.60 600 605 610 615 620 Rp 625 0.65 0.70 x 630 635 640 650 660 670 0.75 0.80 3 ...
Page 5
... No noticeable exposure of base metal of the lead with a solder-dipped finish. Anode 28.6±1 内容 Description エポキシ樹脂 Epoxy Resin 0.25g(TYP) NSPR510GS 管理番号 No. STS-DA7-1751 (単位 Unit: mm) (単位 Unit: mm, 公差 Tolerance: ±0.2) 1.5 MAX Not Soldered 1 7 ...
Page 6
SOLDERING • Recommended Hand Soldering Condition Temperature 350°C Max Soldering Time 3sec Max No closer than 3mm from Position the base of the lens. * Solder the LED no closer than 3mm from the base of the lens. Soldering beyond ...
Page 7
... QTY. PCS RoHS NICHIA CORPORATION 491 OKA, KAMINAKA, ANAN, TOKUSHIMA, JAPAN * 客先型名を*******で示します。 客先型名が設定されていない場合は空白です。 ...
Page 8
... Lot Number is presented by using the following alphanumeric code. YMxxxx - RRR Y - Year Year Y 2009 9 2010 A 2011 B 2012 C 2013 D 2014 Month Month xxxx-Nichia's Product Number RRR-Ranking by Color Coordinates, Ranking by Luminous Intensity Month ...
Page 9
DERATING CHARACTERISTICS 周囲温度-許容順電流特性 デューティー比-許容順電流特性 Ambient Temperature vs Allowable Forward Current Derating1 100 80 60 (40, 50. 周囲温度 Ambient Temperature(°C) Duty Ratio vs Allowable Forward Current Duty 1000 150 100 ...
Page 10
OPTICAL CHARACTERISTICS * 本特性は参考です。 All characteristics shown are for reference only and are not guaranteed. 発光スペクトル Spectrum 1.0 0.8 0.6 0.4 0.2 0.0 450 指向特性 Directivity -50° -60° -70° -80° -90° 1 Spectrum 500 550 600 波長 Wavelength(nm) Directivity1 0° ...
Page 11
FORWARD CURRENT CHARACTERISTICS / TEMPERATURE CHARACTERISTICS * 本特性は参考です。 All characteristics shown are for reference only and are not guaranteed. 順電圧-順電流特性 Forward Voltage vs Forward Current 1000 150 100 1.5 2.0 Forward Voltage(V) 順電流-相対光度特性 Forward Current vs Relative ...
Page 12
FORWARD CURRENT CHARACTERISTICS / TEMPERATURE CHARACTERISTICS * 本特性は参考です。 All characteristics shown are for reference only and are not guaranteed. 周囲温度-色度(主波長)特性 Ambient Temperature vs Chromaticity Coordinate(λd) 0.33 0.32 0.31 -30°C(620nm) 0.30 0.29 0.28 0.68 0.69 0.70 順電流-主波長特性 Forward Current vs Dominant ...
Page 13
... F 60°C, RH=90%, I =20mA F T =-30°C, I =20mA A F Conditions ) I =20mA >U.S.L.×1 =20mA <L.S.L.×0 =5V >U.S.L.×2 L.S.L. : Lower Specification Limit NICHIA STS-DA1-2047 <Cat.No.111129> Failure Test Criteria Duration # #1 100cycles #1 10cycles # 1000hours #1 1000hours #1 1000hours #1 1000hours #1 500hours #1 1000hours #1 Failure Criteria Units Failed/Tested 0/50 ...
Page 14
CAUTIONS (1) Lead Forming ● When forming leads, the leads should be bent at a point at lease 3mm from the base of the epoxy bulb. Do not use the base of the leadframe as a fulcrum during lead forming. ...
Page 15
... Nichia. When defective LEDs are found, the customer shall inform Nichia directly before disassembling or analysis. ● Both the customers and Nichia will agree on official specifications of supplied products before a customer's volume production. ● Specifications and appearance subject to change for improvement without notice. ...