NSSW206 Nichia, NSSW206 Datasheet - Page 6

• Manufacturer Part Number: NSSW206
• Manufacturer: Nichia

Specifications of NSSW206

• Size Lxwxh (mm): 3.8x1.0x0.6
• Lumi-nous Inten-sity Typ(cd): 2.4
• Lumi-nous Flux Typ(lm)): 6.6
• Forward Voltage Vf(v) Typ: 3.10
• Forward Voltage Vf(v) Max: 3.40
• Directivity (degree): 120\/115
• If (ma): 20
• Mounting Style: Through Hole

SOLDERING
• Recommended Reflow Soldering Condition(Lead-free Solder)
● Recommended Soldering Pad Pattern
* The product is designed to be reflow soldered to a PCB. If you use dip soldering for the products,
* Reflow soldering must not be performed more than twice. Manual soldering must only be done once.
* Care should be taken to avoid cooling at a rapid rate and ensure the peak temperature ramps down slowly.
* Customer is advised to use nitrogen reflow soldering as air flow process can cause optical degradation
* Repairing should not be done after the LEDs have been soldered. When repairing is unavoidable,
* When soldering, avoid applying any stress to the LED package while heated.
Nichia cannot guarantee its reliability.
due to the heat and atmosphere of reflow soldering.
a double-head soldering iron should be used.
It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
1 to 5°C per sec
Pre-heat
180 to 200°C
120sec Max
1.5
60sec Max
Above 220°C
2.1
260°C Max
10sec Max
1.5
• Recommended Manual Soldering Condition
(単位 Unit: mm)
Temperature
Soldering Time
350°C Max
3sec Max
5