S3D2 Omron Corporation, S3D2 Datasheet - Page 2

• Manufacturer Part Number: S3D2
• Description: Sensor Controller
• Manufacturer: Omron Corporation

Ratings and Specifications
* The timer will not operate in response to input signals received within 50 ms after the Controller power is turned ON.
Item
Rated supply
voltage
Power consumption
Power supply for
Sensor
Connected Sensor
Input
signals
Input response time
Output minimum
pulse width
Control output
Life ex-
pectan-
cy (relay
output)
Output response time 10 ms max.
Timer functions
Other functions
Maximum allowable
time of momentary
power failure
Ambient
temperature range
Ambient humidity
range
Noise immunity
Dielectric strength
Vibration
(destruction)
Weight
ON
OFF
Short-
circuit
current
Maximum
applied
voltage
Mechanical 50,000,000 operations min. (switching frequency: 18,000 operations/h)
Electrical
Model
*
Type
100 to 240 VAC ± 10% 50/60Hz
15 VA max.
12 VDC ± 10% (includes all variations), 200 mA max. (with short-circuit protection)
NPN transistor output (with sinking current of 18 mA min.) or contact output
0 to 4 V (5 mA min.)
8 to 12 V (2 mA max.)
11 mA TYP (18 mA max.)
30 V
0.1 ms
10 ms max.
Relay output SPST-NO
250 VAC, 2A (cosφ = 1)
100,000 operations min. (switching frequency: 1,800 operations/h)
Signal input reverse
20 ms max.
Operating: −10 to +55°C, Storage: −25 to +65°C (with no icing)
Operating/storage: 35% to 85%
Operating power supply: 1,500 V (p-p) min.; pulse width: 100 ns, 1 µs; rise time: 1 ns
Input/output: 1,200 V (p-p) min.; pulse width: 100 ns, 1 µs; rise time: 1 ns
1,500 VAC min.(between power supply terminals and I/O terminals, and between non-cur-
rent-carrying parts)
10 to 55 Hz, double-amplitude of 0.75 mm for 2 hours each of the X, Y, and Z directions
Approx. 140 g
S3D2-DK
× 2
function
Single-
---
Two inputs/
two outputs
OFF-delay
0.1 to 1 s
1 to 10 s
selectable
Single-func-
OFF-delay)
S3D2-EK
tion (with
tion (AND/OR
Relay output SPDT (shared common)
250 VAC, 3 A (cosφ = 1)
(Output
reversible)
AND/OR
operating
mode
selection
Single-func-
operation)
S3D2-AK
---
IN1 2 ms
IN2 2 ms
• Signal input
• Flip-flop
reverse
function
S3D2-BK
Flip-flop
function
0.1 ms
One-shot, ON-delay,
and OFF-delay
0.1 to 1 s
1 to 10 s
selectable
• Signal input reverse
• Sync mode selection
• AND/OR operating mode
S3D2-CK
selection
Multi-function
Two inputs/one output
0.5 ms max.
NPN open
collector output,
30 VDC, 100 mA
(NO, NC)
Residual voltage
(ON)1.5 V max.
Leakage current
(OFF): 0.1 mA
max.
0.5 ms max.
0.01 to 0.1 s
0.1 to 1 s
selectable
S3D2-CC
24 VDC ± 10%
2.5 VA max. (excluding Sensor power supply)
24 VDC (supplied from power supply)
8 to 30 V (2 mA max.)
10 ms max.
Relay output SPDT
250 VAC, 3 A (cosφ = 1)
10 ms max.
• Signal input
• AND/OR
Operating power supply: 480 V (p-p) min.; pulse
width: 100 ns, 1 µs; rise time: 1 ns
Input/output:
1,000 V (p-p) min.; pulse width: 100 ns, 1 µs;
rise time: 1 ns
1,500 VAC min.
(between power supply terminals and non-cur-
rent-carrying parts)
tion (AND/OR
Single-func-
S3D2-AKD
reverse
operating
mode
selection
operation)
---
One-shot, ON-delay,
and OFF-delay
0.1 to 1 s
1 to 10 s
selectable
• Signal input reverse
• Sync mode selection
• AND/OR operating mode
S3D2-CKD
selection
Multi-function (24 VDC)
0.5 ms max.
NPN open
collector output,
30 VDC, 100 mA
(NO, NC)
Residual voltage
(ON): 1.5 V max.
Leakage current
(OFF): 0.1 mA
max.
0.5 ms max.
0.01 to 0.1 s
0.1 to 1 s
selectable
S3D2-CCD
S3D2
2