LEA-4A u-blox, LEA-4A Datasheet - Page 16
LEA-4A
Manufacturer Part Number
LEA-4A
Description
Antaris 4 Gps Modules? Data Sheet
Manufacturer
u-blox
Datasheet
1.LEA-4A.pdf
(18 pages)
Interface
Serial Port 1
Output
USB Output
Serial Port 1 Input
USB Input
TIMEPULSE
Module
LEA-4P, LEA-4R
LEA-4H, LEA-4T
LEA-4A, LEA-4M, LEA-4S
6 Settings
6.1 Default Settings
Following default settings apply if all GPSMODE pins are left open. Please refer to the ANTARIS
Integration Manual [1] for information about further settings.
Table 19: Available Protocols.
Table 20: sensitivity settings
LEA-4A, LEA-4H, LEA-4M, LEA-4P, LEA-4R, LEA-4S, LEA-4T - Data Sheet
GPS.G4-MS4-06143-1
Module
All
All
All
All
Sensitivity Setting
Normal
Auto
High
Settings
9600 Baud, 8 bits, no parity bit, 1 stop bit
Configured to transmit both NMEA and UBX protocols, but only
following NMEA and no UBX messages have been activated at start-up:
GGA, GLL, GSA, GSV, RMC, VTG, ZDA, TXT
9600 Baud, 8 bits, no parity bit, 1 stop bit, Autobauding disabled
Automatically accepts following protocols without need of explicit
configuration:
UBX, NMEA, RTCM
The GPS receiver supports interleaved UBX and NMEA messages.
Automatically accepts following protocols without need of explicit
configuration:
UBX, NMEA
The GPS receiver supports interleaved UBX and NMEA messages.
USB Power Mode: Self Powered
1 pulse per second, synchronized at rising edge, pulse length 100ms
Remark
The sensitivity mode can be changed with the
CFG-RXM message.
your position is our focus
®
4 System
Page 16