RS062R Cyntec Co., Ltd., RS062R Datasheet - Page 10

• Manufacturer Part Number: RS062R
• Description: 0201x2, Resistor Network Lead / Halogen Free
• Manufacturer: Cyntec Co., Ltd.

CYNTEC CO., LTD.
乾坤科技股份有限公
乾坤科技股份有限公司 司 司 司
乾坤科技股份有限公
乾坤科技股份有限公
9. Care note
9-1 Care note for storage
9-2 Care note for operating and handling
(1) Resistor network shall be stored in a room where temperature and humidity must be
(2) Resistor network shall be stored as direct sunshine doesn’t hit on it.
(3) Resistor network shall be stored with no moisture, dust, a material that will make
(1) It is necessary to protect the edge and protection coat of resistors from mechanical stress.
(2) Handle with care when printing circuit board (PCB) is divided or fixed on support body,
(3) Resistors shall be used with in rated range shown in specification. Especially, if voltage more
(4) In case that resistor is loaded a rated voltage, it is necessary to confirms temperature of a
(5) Observe Limiting element voltage and maximum overload voltage specified in each
(6) If there is possibility that a large voltage (pulse voltage, shock voltage) charge to resistor, it
controlled. (temperature 5 to 35 , humidity 45 to 85% RH) However, a humidity keep it
low, as it is possible.
solderability inferior, and a harmful gas (Chloridation hydrogen, sulfurous acid gas, and
sulfuration hydrogen)
because bending of printing circuit board (PCB) mounting will make mechanical stress for
resistors.
than specified value will be loaded to resistor, there is a case it will make damage for
machine because of temperature rise depending on generating of heat, and increase
resistance value or breaks.
resistor and to reduce a load power according to load reduction curve, because a temperature
rise of a resistor depends on influence of heat from mounting density and neighboring
element.
specification
is necessary that operating condition shall be set up before use.
℃
DOCUMENT : RT720000NH
REVISION
PAGE
: 10 OF 10
: A0