Z4K300-RN-10 Superworld Electronics, Z4K300-RN-10 Datasheet - Page 5

• Manufacturer Part Number: Z4K300-RN-10
• Description: Z4 Series Ferrite Chip Beads
• Manufacturer: Superworld Electronics

NOTE : Specifications subject to change without notice. Please check our website for latest information.
FERRITE CHIP BEADS
8. RELIABILITY & TEST CONDITION :
Bending Strength
Random Vibration Test
Drop
Loading at High
Temperature
Humidity
Thermal Shock
Low temperature storage test
Drop
Derating Curve
For the ferrite chip bead which withstanding current over 1.5A, as the
operating temperature over 85°C, the derating current information is
necessary to consider with. For the detail derating of current, please
refer to the Derated Current vs. Operating Temperature curve.
ITEM
SUPERWORLD ELECTRONICS (S) PTE LTD
The ferrite should not be damaged by forces
applied on the right condition.
Appearance : Cracking, shipping & any other
defects harmful to the characteristics should
not be allowed.
Impedance : Within ±30%
Drop 10 times on a concrete floor from a
height of 75cm.
Appearance : No damage.
Impedance : Within ±30% of initial value.
Appearance : No damage.
Impedance : Within ±30% of initial value.
Drop 10 times on a concrete floor from a
height of 75cm.
Measured : 5 times
Phase
R0.5(0.02)
1
2
Temperature (°C)
PERFORMANCE
+125±5°C
-55±2°C
Chip
A
1.0(0.039)
Times (min.)
30±3
30±3
Frequency : 10-55-10Hz for 1 min.
Amplitude : 1.52mm
Directions & times : X, Y, Z directions for 2 hours.
A period of 2 hours in each of 3 mutually perpendicular
directions (Total 6 hours).
a. No mechanical damage
b. Impedance change : ±30%
Temperature : 125±5°C
Applied Current : rated current
Duration : 1008±12hrs
Measured at room temperature after placing for 2 to 3hrs.
Humidity : 90~95% RH.
Temperature : 40±2°C
Duration : 1008±12hrs
Measured at room temperature after placing for 2 to 3hrs.
For Z Series :
Condition for 1 cycle
Step1 : -55±2°C 30±3 min.
Step2 : +125±5°C 30±3 min.
Number of cycles : 5
Measured at room temperature after placing for 2 to 3hrs.
Temperature : -55±2°C
Duration : 1008±12hrs
Measured at room temperature after placing for 2 to 3hrs.
a. No mechanical damage
b. Impedance change : ±30%
Series name
6
5
4
3
2
1
0
Derating
Z2
Z3
Z4
Z5
Z6
Z7
Z8
Operating Temperature(¢X C )
Operating Tem perature(°C)
6A
5A
4A
3A
2A
1.5A
1A
mm (inches)
0.80 (0.033)
1.40 (0.055)
2.00 (0.079)
2.70 (0.106)
TEST CONDITION
85
Z4 SERIES
P-Kgf
0.3
1.0
2.5
2.5
125
04.07.2008
PG. 5