RLZB-32 Roithner LaserTechnik GmbH, RLZB-32 Datasheet - Page 4

• Manufacturer Part Number: RLZB-32
• Description: Znse White Led
• Manufacturer: Roithner LaserTechnik GmbH

・ It is recommended to use isopropyl alcohol as a solvent for cleaning the LEDs. When using
・ Do not clean the LEDs by the ultrasonic. When it is absolutely necessary, the influence of
・ Care must be taken to ensure that the reverse voltage will not exceed the absolute maximum
・ These LEDs described in this spec. sheets are intended to be used for ordinary electronic
・ Any conditions for pulse operation for LED over I
・ The formal specifications must be exchanged and signed by both parties before large volume
・ The appearance and specifications of the product may be modified for improvement without
5.5 Cleaning
5.6 Others
other solvents, it should be confirmed before hand whether the solvents dissolve the resin or
not. Freon solvent should not be used to clean the LEDs because of worldwide regulations.
ultrasonic cleaning on the LEDs depends on the factors such as ultrasonic power and the
assembled condition. Before cleaning pre-test should be done to confirm will not cause any
damage to the LEDs.
rating when using the LEDs with matrix drive.
equipment. Potential applications of these LED lamps include displays or backlighting for
in-door instruments or mobile gear.
purchase begins.
notice.
fpm
are not recommended.