NJL5901AR-1 New Japan Radio Co.,Ltd, NJL5901AR-1 Datasheet - Page 7

• Manufacturer Part Number: NJL5901AR-1
• Description: Njl5901ar-1 Cobp Photo Reflector
• Manufacturer: New Japan Radio Co.,Ltd

1. Taping Size
2. Taping Strength
3. Packaging
16-Feb-07
1) Carrier tape is used with Polycarbonate.
2) Cover tape is used with electro statistically prevention treated Polyester type tape.
3) Product taping direction is to place the index mark against the pull out direction of the tape as in the drawing.
Pull up the cover tape from the carrier tape, and when the opening angle comes around 10 to 15°, and the peeling-off
strength is to be within the power of 20 to 70g.
1) The taped products are to be rolled up on the taping reel as on the drawing.
2) Rolling up specification
3) Taping quantity
4) Seal off after putting each reels in a damp proof bag with silica gel.
2-1) Start rolling
2-2) End of rolling : Carrier tape open space more than 20 Pieces, and 2 round of reel space at the cover tape only.
Pull out direction of tape
1.45
2.0
: Carrier tape open space more than 20 Pieces.
: 2,000 Pieces.
4.0
4.0
NJL5901AR-1 Taping Specification
Label
Carrier Tape
φ
1.5
Cover Tape
8.5
[CAUTION]
given for information , without any guarantee
as regards either mistakes or omissions. The
application circuits in this databook are
described only to show representative usages
of the product and not intended for the
guarantee or permission of any right including
the industrial rights.
The specifications on this databook are only
NJL5901AR-1
0.25
0.85
UNIT : mm
(TE1)
- 7 –