BAF09-10 Absopulse Electronics Ltd, BAF09-10 Datasheet
![no-image](/images/no-image-200.jpg)
BAF09-10
Manufacturer Part Number
BAF09-10
Description
60w To 180w, Dc/dc Converters In Eurocard Or Enclosed Format Baf 09-10, Baf 109-110, Baf 209-210 And Bab 210 Series
Manufacturer
Absopulse Electronics Ltd
Datasheet
1.BAF09-10.pdf
(1 pages)
This rugged, field proven series has served as a key product in the 60 - 180W range DC/DC conversion for two decades. The
design was upgraded several times over the years and has an impeccable track record. The basic concept has remained the same; a
flexible design that can easily be customized for almost any requirements without set-up/NRE costs and competitive production
cost. The chart above is a short summary of the approximate capacities of the various units of the BAF/BAB 210 series. Due to
the large design headrooms and very conservative design approach, the power limits can also be extended. For a more standard
selection, our DCW Series is available. Low component count and the use of components with established reliability result in a
high MTBF. Versions for N+1 redundant operation are available. Additional ruggedizing and conformal coating are also
available for applications requiring higher immunity to shock, vibration and humidity. All units are manufactured at our plant
under strict quality control. The following specifications are guidelines only.
Input Voltage
Any DC voltage from
12V to 130Vdc.
24 or 48Vdc are standard.
Voltage tolerance: ± 20% typical
Consult factory for other voltages
Input Protection
Inrush current limiting
Varistor
Reverse polarity protection
Internal safety fuse
Lower voltage than the specified
minimum input will not damage the
unit
Isolation
Depends on the required input/output
configuration. At a minimum:
500VDC input to chassis,
500VDC input to output,
500VDC output to chassis
Standards
Designed to meet EN60950 and
related standards.
EMI
EN 55022 Class A as a minimum
Switching Frequency
100kHz +/- 10kHz
Binder Section: AC/DC Power Supplies
•
• Versatility for customizing
•
•
•
Rugged industrial quality
Single double or triple-output
Conduction/convection cooled
Field proven design
Enhancements to these general specifications can be accommodated upon request. Specifications subject to change.
Designer and manufacturer of quality converters, inverters, UPS systems, complete rack mount systems and DC-input
60W to 180W, DC/DC Converters in Eurocard or Enclosed Format
BAF 09-10, BAF 109-110, BAF 209-210 and BAB 210 Series
fluorescent lamp inverters since 1982. Custom or standard. Absopulse is a BABT-approved Facility
Output Voltages
Any DC voltage
Please consult factory
Redundancy diode
Available as option
Line/Load Regulation
± 1% combined from zero load to
full load
Dynamic Response
Max 5% voltage deviation for 10%
to 50% load step, with better than
1msec recovery time
Output Ripple / Noise
Better than 1% of output voltage
peak to peak or 0.2% Vrms
(20MHz BW)
Output Overload Protection
Current limiting with hiccup mode
short-circuit protection
Models with constant current
output are available
Output Overvoltage Protection
Double regulator loop, completely
stable and independent of main
regulator loop
Model
BAF 09
BAF 10
BAF 109 100W
BAF 110 100W
BAF 209 100‐150W 1 or 2
BAF 210 100‐150W 3
BAB
210
Output W
60W
60W
120‐180W 2 or 3
SPECIFICATIONS
August 5, 2009/TS/CL
Outputs Package Size
1 or 2
3
1 or 2
3
Efficiency
Typically 80% at full load
depending on input/output
combination
Operating Temperature Range
0 to +50
Extended temperature ranges
available
Temperature Drift
0.03% per ºC over operating
temperature range
Cooling
Eurocard (plug-in): convection only
Enclosed case: conduction via base
plate and convection
Environmental Protection
Basic ruggedizing
Heavy ruggedizing and conformal
coating as option
MTBF
160,000 hours at 45
Demonstrated MTBF is
significantly higher
Indicators
Eurocard: LED status and optional
front-panel adjustment
Enclosed: Green output ON LED
visible through cooling slots
o
F1 or 3U x 160
F1 or 3U x 160
F2 or 3U x 220
F2 or 3U x 220
F2 or 3U x 220
F2 or 3U x 220
F2 or 3U x 220
C for full specifications.
o
C
ABSOPULSE ELECTRONICS LTD
110 Walgreen Road, Ottawa
Ontario. K0A 1L0. CANADA
Tel: (613) 836-3511 Fax: (613) 836-7488
E-mail:
www.absopulse.com
Made in Canada
absopulse@absopulse.com
Control Input
None
Alarm Output
None on standard version
Form C available as option
Dimensions
Eurocard (plug-in module):
BAF09/10: 3Ux 160mm x 8-10HP
BAF109/110:3Ux 220mm x 8-10 HP
BAF209/210:3Ux 220mmx 8-12HP
BAB 210: 3Ux 220mm x 8-12HP
The front-panel width depends on
output power and cooling
Special versions with 6HP and 4HP
front-panel width are also available.
Enclosed case (F-package)
BAF09/10: F1: 4.43" x 2" x 7.9"
BAF109/110: F2: 4.43"x 2.25"x 10.1"
BAF209/210: F2: 4.43"x 2.25"x 10.1"
BAB 210: F2: 4.43"x 2.25"x 10.1"
Connectors:
Eurocard (Plug-in): H15 DIN
Enclosed case: terminal block
RoHS Compliance
Fully compliant
Warranty
Two years subject to application
within good engineering practice