IRM-3636 Everlight Electronics Co., Ltd., IRM-3636 Datasheet - Page 4

• Manufacturer Part Number: IRM-3636
• Description: Infrared Remote-control Receiver Module
• Manufacturer: Everlight Electronics Co., Ltd.

Carrier frequency f0
Modulated IR signal
Min 6 or 10 pulses
Test Method： ： ： ：
Block Diagram：
The specified electro-optical characteristics is satisfied under the following
Conditions at the controllable distance.
Everlight Electronics Co., Ltd.
Device No
Measurement place
External light
Standard transmitter
Measuring system
A place that is nothing of extreme light reflected in the room.
Project the light of ordinary white fluorescent lamps which are not high
Frequency lamps and must be less then 10 Lux at the module surface.
(Ee ≦ 10Lux)
A transmitter whose output is so adjusted as to Vo=400mVp-p and the output
Wave form shown in Fig.-1.According to the measurement method shown in
Fig.-2 the standard transmitter is specified.
However , the infrared photodiode to be used for the transmitter should be
λ p=940nm, ∆λ =50nm. Also, photodiode is used of PD438B(Vr=5V).
(Standard light / Light source temperature 2856 ° K).
According to the measuring system shown in Fig.-3
：
IN
S ZDMO-036-045
Oscillator
EVERLIGHT ELECTRONICS CO.,LTD.
Input
Prepared date
http:\\www.everlight.com
CGA & filter
AGC/ATC & digital control
GND
：
2 1-Jun-06
Vs
Demodulator
Prepared by
Rev 1
IRM-36xx SERIES
：
Page: 4 of 9
Meijuan Zhang
OUT
µC